Flow Meter Applications and Flow Measurement

SmartMeasurement is among the world‘s leading process measurement companies involved in the development and production of industrial flow meter technologies.

We provide our customers with the best-fit application solutions by combing our over 25 years of experience in developing and managing global sales networks with our engineering and manufacturing capabilities. Our products consistently meet or exceed our users’ expectations in terms of quality, performance capability, service, and design.

Our industrial solutions section provides hundreds—if not thousands—of well-known and successful applications in many industries. Regardless of your industry, SmartMeasurement offers you not only flow and pressure measuring devices for virtually any medium but also the expertise to provide our customers with the best solutions in terms of both economic and technical merits for any given application. Our focus is not only on well-known industrial applications but also unique and custom products to meet our customer’s needs.

Flow Meters in Building

SmartMeasurement’s products have been used successfully in many Building Automation flow measurement and energy measurement projects. Our AlsonicEG and AlmagEG energy flow meters have been used in water and energy measurement for chiller optimization, hot water consumption monitoring, and primary & secondary heat exchanger flow monitoring. SmartMeasurement’s ultrasonic flow meters have been used for energy balancing optimization while our electromagnetic flowmeters have been used for chemical addition optimization and other water & energy control applications. The ATMF series thermal flowmeters have been used for air handling fan coil control and hot air measurement. Our ALVT vortex flow meters are commonly used for evaporation losses and other building steam measurement applications. SmartMeasurement provides a one-stop shop for all of your energy meter and flow metering requirements in the Building Automation industry.

HVAC (Heat Ventilation & Air Conditioning)

A comprehensive metering program is essential to effectively manage and conserve HVAC resources in buildings. While traditional methods using a building control system are used to calculate energy building optimization, SmartMeasurement’s wide range of energy flow meters offer superior accuracies with N.I.S.T. traceable calibration for the entire measurement system in HVAC industries. With an integral display and multiple outputs, SmartMeasurement wide range of energy flow meters provide flow, temperature, energy consumption, etc. The SmartMeasurement AlsonicEG ultrasonic energy meters have been used to effectively measure and control hot & cold water to optimize building cooling systems. Operation costs as high as 30% have been saved in effectively controlling the usage of hot and cold water. The uses of SmartMeasurement wide range of energy flow meters can lead to system capacity analysis; individual building cost allocation and energy efficiency; hydronic system optimization (kw/ton) and troubleshooting, etc.

Advantages:

• SmartMeasurement wide range of energy flow meters provide flow, temperature, energy consumption, etc.
• The SmartMeasurement AlsonicEG ultrasonic energy meters have been used to effectively measure and control hot & cold water to optimize building cooling systems.
• SmartMeasurement’s wide range of energy flow meters offers superior accuracies with N.I.S.T. traceable calibration.

Hot and Chilled Water

Universities, Hospitals, Shopping Malls, and all commercial buildings have central energy plants that provide chilled and hot water distribution throughout the buildings. The energy plants are often managed by facility management companies that bill their customers for the amount of hot water or chilled water being used. Often Internal utility bills were based on the square footage of conditioned space and this fixed cost method offered no incentive for energy conservation by individual building managers. SmartMeasurement offers a wide variety of Energy flow meters. Our AlsonicEG ultrasonic energy meters are used as a non-intrusive energy flow meter without interrupting the flow of heating and cooling water to the buildings. This saves a considerable amount of installation and operation costs since there is no need for flow shut down or cutting the pipe to install. However should water pipes have some particulates or bubbles while needing higher accuracies than ultrasonic energy meters, the SmartMeasurement energy flow meter also comes in electromagnetic technology, the AlmagEG will be the instrument of choice.

The installation of the SmartMeasurement energy flow meter systems provides critical information needed for the planning of future buildings while providing accurate billing for the entire building or each floor. A system that uses multi-technology SmartMeasurement energy flow meters it promotes energy conservation by identifying problem areas and large energy users and billing them accordingly. “This is a win-win situation for everyone. Building maintenance managers who have control over their budget and energy costs can recover the cost that is incurred by the use of less energy which is also better for the environment.

Advantages:

• SmartMeasurement offers a wide variety of Energy flow meters coming in both ultrasonic and magnetic technologies which offers application flexibility to plant managers.
• When water pipes have some particulates or bubbles while needing higher accuracies than ultrasonic energy meters, the SmartMeasurement energy flow meter also comes in electromagnetic technology, the AlmagEG will be the instrument of choice.

Control Rooms

In combined heating and cooling applications the SmartMeasurement AlsonicEG ultrasonic energy flow meter is the best choice. The AlsonicEG provides highly accurate energy measurements for applications such as specially treated water with low electric conductivity and magnetite and buildings where the air-conditioning can’t be turned off. The AlsonicEG enables retrofitting of transducers under pressure with clamp-on non-intrusive installation methods for a cost-effective solution.

The AlsonicEG ultrasonic thermal energy flow meter is a non-intrusive instrument, which is used to accurately measure flow, temperature, and thermal energy consumption (BTU). The transducer can be clamped onto any pipe from ½ -40” (15-1000mm), without cutting the pipe or shutting down the flow at various temperature ranges. The AlsonicEG does not have any moving parts to wear and tear, thus, saving maintenance costs.

The AlsonicEG energy flow meter utilizes transit-time technology and a patented digital signal processing algorithm for better accuracy and turn-downs and with its low flow capabilities as leakage detection in complicated pipeline networks. Several AlsonicEG units can be installed on the chiller distribution pipelines with their signals going to the control room for optimization. The AlsonicEG sends a vast amount of data in Mbus, Bacnet, MODBUS, and other protocols to the BMS system for usage analysis.
Moreover the AlsonicEG.

Advantages:

• SmartMeasurement AlsonicEG ultrasonic energy flow meter is a non-intrusive instrument, which is used to accurately measure flow, temperature, and thermal energy consumption (BTU).
• The AlsonicEG sends a vast amount of data in Mbus, Bacnet, MODBUS, and other protocols to the BMS system for usage analysis.

Energy Flowmeters with More Than 1-2% Bubbles or Particles in the Pipe

Electromagnetic Energy Flow Meters are used when there are more than 1-2% bubbles or particles in the pipe or wherever higher accuracies of greater than 1% are required. The AlmagEG series Electromagnetic Flow Meter complete with integral or remote flow transmitter offers higher accuracies than the ultrasonic energy flow meters.

The flow transmitter includes a backlit graphic display and keypad. Connections to the piping are usually ANSI class flanges (DIN or JIS is also available). The flow tubes are epoxy-coated steel; the sensing electrodes are 316SS; the liner can be polypropylene or ebonite for low-temperature service and PTFE for hot water service. Each flow meter is individually wet-calibrated and accurate to within ±0.2% of reading from 0.3 – 32 feet/sec (0.1 – 10 m/s) velocity. An N.I.S.T. certificate of calibration will be provided with each energy flow meter.

The AlmagEG energy flow meter calculates energy consumption, and energy loss as well as many other important functions suited for thermal energy applications. The AlmagEG energy flow meter is also well suited for cooling applications with low differential temperatures as well as general cooling and heating systems. Outputs can be 4-20mA and programmable pulse as well as various digital signals such as MODBUS, BACNET, and MBUS, etc. The AlmagEG energy flow meter is also capable of measuring bi-directional flow. Each AlmagEG energy flow meter is factory-programmed for its specific application and can be re-programmable using its keypad.

Advantages:

• The SmartMeasurement AlmagEG Electromagnetic Energy Flow Meters are used when there are more than 1-2% bubbles or particles in the pipe or wherever higher accuracies of greater than 1% are required.
• The AlmagEG energy flow meter is also well suited for cooling applications with low differential temperatures as well as general cooling and heating systems.

Steam Flow Measurement for District Heating

District heating distributes heat generated from a centralized location to residential or commercial for heating requirements such as pace heating and water heating. The heat is often obtained from a cogeneration plant that burns either fossil fuels or biomass. District heating plants can provide higher efficiencies and better pollution control than localized boilers. Facility managers often estimate steam flow by measuring condensate or using vortex meters to measure the total output of steam generated and distributed to each building. Since steam flow is greatly affected by changes in pressure and/or temperature, an integral steam mass flow solution such as the SmartMeasurement ALVT-Mass. The ALVT-Mass with its capability of measuring five flow parameters with one process connection, calculates true mass flow directly by using its integral temperature and pressure sensors. By capturing virtually all district energy market worldwide, mass flow vortex meters such as the ALVT-Mass has become the “steam meter” for the industry. Other features include insertion style for large pipes, high turndown, field-configurable with onboard diagnostic electrons, and no moving parts to prevent wear and tear.

Advantages:

• The SmartMeasurement ALVT-Mass with its capability of measuring five flow parameters with one process connection, calculates true mass flow directly by using its integral temperature and pressure sensors.
• The SmartMeasurement ALVT-Mass has become the “steam meter” for industry because not only does it measure mass flow directly, but it also comes in insertion style for large pipes, high turndown, field-configurable with onboard diagnostic electrons, and no moving parts to prevent wear and tear.

Measuring Low-Flow Steam with Existing Piping

Building engineers always over-engineer their systems with oversized piping. The oversized piping in steam flow meter applications makes it very difficult to measure low flows should process engineers deem it necessary for their analysis. Oftentimes times a smaller flowmeter capable of measuring lower flows is needed but existing piping may be too difficult to change. However, the SmartMeasurement ALVT inline vortex flow meters are designed to fit in any existing pipe but measure lower flows than other vortex flow meters. The flanged type ALVT vortex flow meters can have a much smaller flow section down to ½ of the inlet section, enabling it to measure very low flows. Moreover, when there is a reduction in steam requirements, customers can save thousands of dollars in installation costs by not having to downsize the piping. The ALVT-Mass integral vortex mass meters can measure the wide range of demand between the summer and winter months where temperatures or pressure changes thereby effective steam usage.

Advantages:

• The SmartMeasurement ALVT inline vortex flow meters are designed to fit in any existing pipe but measure lower flows than other vortex flow meters to for building steam metering.
• The ALVT-Mass integral vortex mass meters can measure the wide range of demand between the summer and winter months where temperatures or pressure changes thereby effective steam usage.

Chemical

SmartMeasurement’s flowmeters have been successfully used in a variety of applications in the Chemical Industry. Examples include using ultrasonic flowmeters or all-ceramic electromagnetic flowmeters to measure acids and other corrosive materials, using mass flow meters to mass balancing of gases and liquids, and mass flow meters in mixing and batching applications where the recipe is written based on mass units of measure instead of volumetric. SmartMeasurement provide a one-stop shop for all flow metering requirement in the Chemical and Petro-chemical industries.

Sulfuric Acids Measurement

Titanium dioxide is a chemical compound used in making paints, cosmetics, plastics, and other products and is processed either by chlorine or sulfates. Usually, the diluted acid is completely reprocessed in separated recycling plants and then fed back into the production process. Such recycling takes place by concentrating the diluted acid to a certain threshold and then feeding it into several vacuum evaporators, arranged one after another, to subsequently reach concentration levels above 60%.

During inspection and maintenance, the recycling plants are shut down. When the plant comes back online, the pumps, which convey the diluted acid flow to the evaporators, are particularly subject to enormous stresses from the rapid temperature rise. A non-intrusive ultrasonic flowmeter such as our AlsonicDSP, with its ability to measure liquid flows containing up to 30% particulates or bubbles, provides an excellent solution for measuring the acid flow to the evaporators while minimizing the amount of wear of the pumps. The clamp-on transducers employed by the AlsonicDSP lend themselves to applications with larger pipe sizes because the line does not need to be broken to install them and because they are much more inexpensive than large, in-line style meters. Since the clamp-on ultrasonic transducers are simply mounted on the outside of the plastic pipes, they are not subject to any mechanical wear and tear by the aggressive medium or the solid particles contained therein.

By retrofitting with the AlsonicDSP ultrasonic flow meter, which may be installed during ongoing operation, the plant restart could be optimized effectively, not only regarding lower wear of the pumps but also regarding a reduction in the degree of solid particles caking in the heat exchangers, which in turn effects the overall energy efficiency of the plant.

Advantages:

• Reliable, non-intrusive flow measurement – no need to cut the pipe for installation
• No corrosion or wear and tear caused by solid particles carried in the liquid flow
• No risk of leakages
• Cost-effective retrofitting without any impact on the pipe system or interruption of the process operation
• Robust fixed ultrasonic flow meter systems such as the AlsonicDSP ultrasonic flow meter may be used in harsh industrial environments

Hydrofluoric Acids Measurement

Hydrofluoric Acid is an aggressive acid used in producing Teflon®. Liquid flow meters used with this highly corrosive fluid must be lined with specialty plastics like PTFE. Electromagnetic flow meters with PTFE liners and corrosion-resistant materials such as SmartMeasurement’s AlmagWP offer one option for these applications. If plant operators cannot shut down their process, the SmartMeasurement AlsonicDSP family of clamp-on ultrasonic flow meters provides another viable alternative. The ultrasonic flow meters come with transducers that are installed outside the pipe wall and never come into contact with harsh acids. An added benefit is that shutting down the process is not necessary for installation or maintenance.
The AlsonicDSP, not only measures the volumetric flow rate, but also the sonic velocity of the liquid. A PLC or DSC can be programmed to correlate acid concentration level to the measures of sonic fluid velocity as there is a direct relationship between sonic velocity and changes in Hydrofluoric Acid concentration. This allows the operator to also supervise the concentration of the Hydrofluoric Acid running through the pipe (range between 45 – 65% conc).

Advantages:

• Non-intrusive AlsonicDSP ultrasonic flow meter – no media contact, no leakage risk.
• Long service life with virtually no maintenance required.
• Additional concentration measurement by programming a controller to determine the changes in concentration of acids versus sonic velocity.
• AlmagWP with Teflon liners or ALMAGWP with all ceramic construction offers better accuracy of up to 0.2% vs. 0.5% for ultrasonic meters; however, process shutdown is required for installation.

Sodium Hydroxide Measurement

Sodium Hydroxide (NaOH) is produced using electrolysis and then distributed via piping to the respective production plants for further processing. A stable concentration of the Sodium Hydroxide is thus obligatory and has to be monitored very closely. Inline instrumentation, such as previously installed density meters, and inline liquid flow meters regularly failed due to the harsh conditions.
The AlsonicDSP ultrasonic flow meter, not only measures the volumetric flow rate but also the sonic velocity of the liquid, a PLC or DSC can be programmed to relate to acid concentration level versus fluid sonic velocity. There is a direct relationship between sonic velocity and changes in Sodium Hydroxide concentration. The operator is now able to also supervise the concentration of the Sodium Hydroxide running through the pipe. If the measured values deviate from the preset values, the process is automatically regulated.

Advantages:

• Reliable, non-intrusive flow and concentration measurement.
• Installation without process interruption.
• No media contact, no wear on the instrumentation, and no risk of leaks.
• Drift-free measurement and long-term stable life.
• AlmagWP with Teflon liners or ALMAGWP with all ceramic liners offers better accuracy of up to 0.2% vs. 0.5% for ultrasonic meters; however, process shutdown is required for installation.

Ammonia and Nitric Acids Measurement

In production sites for Ammonia (NH3) and Nitric Acid (HNO3), oftentimes operators rely on a radiometric analyzer for the concentration measurement of a watery Ammonia solution. Besides the difficulties in handling the radioactive materials of the analyzer, the measurement readings are unstable and may differ from the laboratory samples. Inaccurate readings of the online measurement can lead to an over-concentration of the Ammonia solution (between 0.5 to 1.0%) and thus increased costs for the operator. Therefore, an accurate non-intrusive flow transmitter with its ability to infer concentration level is a superior solution.
The AlsonicDSP ultrasonic flow meter, not only measures the volumetric flow rate but also the sonic velocity of the liquid, a PLC or DSC can be programmed to relate acid concentration levels versus fluid sonic velocity. There is a direct relationship between sonic velocity and changes in concentration. The operator is now able to also supervise the concentration of the fluids running through the pipe. If the measuring values deviate from the preset values, the process is automatically regulated.
With the AlsonicDSP ultrasonic flow meter, the plant operator is now able to reliably measure the right concentration of the ammonia solution with an accuracy of 0.1 to 0.3% – always matching the laboratory results.

Advantages:

• Non-intrusive online concentration measurement – substitution of the inaccurate radioactive analyzer
• Reliable and accurate measurements with results that match the laboratory samples.
• Clean and safe solution – no risk of leakages.

Gas Distribution

Many chemical processes require large varying volumes of nitrogen, argon, and oxygen for inert ions or purging, hydrogen as a catalyst, and many other gases. SmartMeasurement’s ATMF series of thermal mass flow meters measure mass flow directly without the need for external pressure and temperature compensation. SmartMeasurement’s ATMF thermal mass flow meters measure very low gas flows for leakage monitoring with very little pressure drop in the process. The ATMF Series features wide flow turndown ratios up to 800:1, integral or remote electronic configurations, HART, or Modbus outputs, and has both CSA/FM and ATEX approvals. Moreover, NIST traceable calibration certificates are supplied with every flow meter.

Advantages:

• Direct mass flow measurement of any gas with actual gas calibration
• Excellent turn-down ratios, low flows of 0.02 mps up to 203 mps.
• The only thermal mass flow meter in the market that provides an in-situ calibration verification.

Flare/Waste Gas Monitoring

SmartMeasurement’s ATMF series thermal mass flow meters are used to measure total gas flow to flare stacks and in feed lines to the main flare headers. The ATMF series thermal mass flow meters feature a no-moving-parts design, high reliability with durable construction, and extremely low flow range detection as mandated by EPA regulations. ATMF series thermal mass flow meters are also used to balance and optimize the control of blower/louver adjustment for smokeless flares. An optional retractable packing gland assembly permits hot tap installation and retraction of the flow element without system shutdown. User-friendly microprocessor-based electronics and a built-in keypad provide high performance and easy on-site programming.

Advantages:

• Direct mass flow measurement of any gas with self-diagnostic capabilities
• Excellent for mass balancing and optimization control
• Complies with EPA and ISO standards for Greenhouse gas monitoring

Nitrogen Gas Supply

Nitrogen is used to control the process media or avoid unwanted contact of the process media with oxygen/air. Reactors are filled and /or blanketed during operation with nitrogen. Continuous flow monitoring of nitrogen feed lines can prevent excessive gas consumption, hazardous situations due to insufficient gas supply, and expensive gas leakages. The SmartMeasurement ALTS series thermal flow switches and ATMF series thermal mass flow meters are used for these applications and feature a wide flow range (turndown ratio), direct mass flow measurement, and no pressure drop in the process media.

Advantages:

• ATMF series thermal mass flow meters are an excellent choice for nitrogen purge lines
• ALTS series thermal flow switches detect flow/no flow conditions or set points above/below a certain flow rate; they can be an economical alternative to flow meters in monitoring leakage
•  Both the ATMF and ALTS have excellent turn-down rations, low flows of 0.02 mps up to 203 mps

Natural Gas Supply Lines

Monitoring natural gas flow to various areas of production is critical in keeping costs under control. In a chemical plant, various areas throughout the production plant require natural gas in the manufacture of the end product. The transportation of natural gas over great distances is a complex task, requiring specialized equipment and facilities to deliver the gas safely, efficiently, and in a ready-to-use form. Considerations include maintaining sufficient pipeline pressure, maintaining pipeline integrity, and keeping moisture levels low. Oftentimes customers use vortex meters and flow computers to calculate mass flow via pressure and temperature compensation fed into a flow computer. A better solution is to use one instrument such as the SmartMeasurement ATMF series thermal mass flow meter. There is no need for external pressure and temperature sensors or a flow computer to calculate mass flow. The ATMF Series offers better turndown ratios than other gas mass flowmeters, is available with integral or remote electronics, HART, or Modbus outputs, and CSA/FM and ATEX approvals for highly explosive environments. A NIST traceable calibration certificate is supplied with every flow meter to validate its accuracy and performance.

Advantages:

• ATMF series thermal mass flow meters offer a better alternative than other gas flowmeters which require additional instruments such as pressure sensors, temperature sensors, and flow computers to measure mass flow with only one instrument.

Mass Flow Measurement for Material in and Outflows

Chemical plants built over ten years ago or more use weight measurement to measure the mass flow which wastes labor material costs by requiring samples to be taken to their laboratories. This type of old-fashioned and low-tech automation is influenced by many human factors which can result in low or unstable mass balancing of chemical fluids.
Chemical process engineers are now using the SmartMeasurement ALCM series of Coriolis mass flow meters for direct process mass flow measurement. Depending on its unique application features, SmartMeasurement offers a variety of unique Coriolis designs such as ALCMUT for higher flows, ALCMDT for lower flows, or ALCM-MB with its micro-bend structure allowing for lower pressure drops.

Advantages:

• Various ALCM Coriolis flow tube designs allow operators to choose which features best fit their applications
• Direct mass flow and density measurement of any liquid
• Excellent for mass balancing and optimization control
• Reduced labor costs by measuring the mass flow of fluids in the process without weighing fluids in the laboratory

• The SmartMeasurement ALCM series of Coriolis mass flow meters offer a more accurate real-time measurement of materials and guarantees stability and continuity of the mass flow measurement. With several flow tube designs, plant operators can choose which features best fit their applications. The production line with the SmartMeasurement series of Coriolis mass flow meters is highly stable, the qualification rate of the product is high, material metering is accurate, labor costs are reduced, laborers are liberated from many operations, and a great amount of cost is saved.

Food and Beverage

SmartMeasurement’s flowmeters have been successfully used in the food and beverage industry in a variety of different applications. Our ALMAGWP electromagnetic flowmeter has been used to measure brewery fluids, juices, and drinking water. The ALCM Coriolis mass flow meters are commonly used for measuring starch solutions and liquified CO2. Our ATMF Series thermal mass flow meters are used for monitoring CO2 gases during fermentation and nitrogen injection for potato chip/snack bags. SmartMeasurement offers a variety of solutions for nearly any application in the Food and Beverage industry.

Flow Measurement in Breweries

The brewing process starts with the addition of malted barley grain and water to the mash cooker.  Mashing allows the enzymes in the malt to break down the starch in the grain into sugars, typically maltose, to create a malty sugary solution.  After mashing the resulting solution is measured with the ALMAGWP electromagnetic flow meters and flows to a filter press that separates the grain.  Oftentimes, the filtered grain byproducts are sold to local farmers.  From the filter press, the solution, now called wort, goes into one of two steam-heated kettles for boiling.  One kettle boils wort while the other undergoes cleaning and preparation. A manually operated coil for steam at the bottom of the kettle preheats the wort.

As the wort temperature reaches the boiling point, the steam in the bottom preheat coil shuts off and the automatic steam heating system takes over. From the steam header, the saturated steam flows through a control valve and ALVTN-Mass flow meters are used to accurately measure the quantity of steam before reaching the kettle. The volume of steam changes with changes in pressure and temperature and an integrated mass flow measurement with both pressure and temperature compensation is far superior to other steam flow measurements that have separate temperature, pressure, and flow computer for the same output.

From the ALVTN-Mass mass flowmeter, the saturated steam flows to the top of an internal boiler in a shell-and-tube heat exchanger. Wort rises through the tube bundle in the heat exchanger while heated by the down-flowing steam, which begins to condense. A deflector at the top of the heat exchanger distributes the wort and prevents foam formation.

The ALVTN-Mass mass flowmeter measures and computes mass flow rates of steam to control heat for boiling the wort, in 500 bbl (15,000-gallon) kettles. The boiling operation continues for 90 minutes, evaporating about 5 to 10% of the solution. The evaporating gases are measured with SmartMeasurement’s ATMF gas mass flow meter for optimization of the process. An addition of hops is used which sterilizes the wort and affects flavor, stability, and consistency. The hops provide bitterness and flavor. Following wort boiling, the solution goes through a period in fermentation tanks and finally packaging in bottles and kegs.

Advantages:

• SmartMeasurement offers a one-stop shop for all flow meter requirements in a brewery. ALVTN-Mass mass flowmeters for steam, ALMAGWP for mash solution, and ATMF gas mass flow meters for CO2 and other vapors.
• Excellent for mass balancing and optimization control.
• The use of ALVTN vortex mass flow meters eliminates the need to also measure temperature and pressure to calculate the mass flow of steam.

Measuring Starch Concentration

When removing water from wheat starch suspension in centrifuges, it is important to determine the exact starch content and adjust it to a specific concentration. Starch content can vary from 0 to 45 % with densities of 1030 to 1180 kg/m³. Water removal is measured by SmartMeasurement ALMAG electromagnetic flow meters. However, measuring the starch content can be tricky. The starch content can be controlled by adjusting the centrifuge’s speed. The objective is to measure the starch content in online mode and use it as the control variable for the centrifuges. The ALCM Coriolis mass flow meters are an ideal instrument to not only measure the mass flow rate of the starch solution but can measure the changes in densities of starch. Density measurement is performed with an accuracy of 1 g per kg. The medium flows through 16 series-connected centrifuges where water is removed. The output signal of the concentration/mass flow measurements is used as the set point for centrifuge speed control.

Advantages:

• The ALCM Coriolis mass flow meter series can measure both the density and mass flow rate of starch for process optimization.
• SmartMeasurement offers a one-stop shop for all flow meter requirements in a starch process. ALCM series of Coriolis mass flow meters for starch concentration and ALMAG electromagnetic flow meters to measure the process water.
• SmartMeasurement offers a variety of ALCM Coriolis mass flow meter flow tubes that can meet any centrifuge application.

Flow Measurement in the Soft Drink Process

In producing soft drinks, CO2 is used for the carbonation of the fluid. While the ALMAG electromagnetic flow meters are used to measure the flow of soft drinks, CO2 measurement offers a unique challenge for soft drink manufacturers. Oftentimes, manufacturers use old technologies gas flow meters such as differential pressure flow meters to measure the flow of CO2 so process engineers can control a valve and provide the right amount of gas for their soft drink production. However differential pressure flow meters are volumetric flow meters that are affected by the changes in CO2 pressure and temperature. Often other instruments are needed to measure the process temperature and pressure to correct the actual amount (mass) of CO2 used for the carbonation process. Soft drink manufacturers are using the ATMF thermal mass flow meters as a better alternative for their CO2 measurement because they measure mass flow directly without the use of other instruments to correct changing temperature and pressure.

Advantages:

• SmartMeasurement offers a one-stop shop for all flow meter requirements in soft drink manufacturing. The ATMF series of gas mass flow meters for CO2 measurement and ALMAG electromagnetic flow meters to measure the amount of soft drinks.
• The ATMF thermal mass flow meter measures the amount of CO2 without the need to measure changes in pressure and temperature
• The ALMAG electromagnetic flow meters are also used in blending, batch control, and, filling operations.

Flow Measurement in the Juice Process

Orange juice concentrates are difficult to apply due to the amount of pulp in them with its high viscosity. Pulp would jam and possibly destroy a mechanical gear-type positive displacement flowmeter which is sometimes used in this application. In addition, the high sugar content makes frequent cleanings necessary on systems running juice concentrate. The ALMAG electromagnetic flow meters with their simple design allow material such as pulp to pass through it.

The process of loading and unloading juice concentrates from tankers is critical and the loading process must be accurate for several reasons. First, to avoid overloading, liable for fines when trucks are beyond the legal weight limits, second to avoid wasting time from having to “drum off” any excess product when it is overloaded and finally time is not wasted when the tanker is undefiled. In a positive displacement pump, the product is transferred to or from the tanker. The sampler system, using SmartMeasurement ALMAG electromagnetic flow meters, pulled a certain amount of product every 50 gallons. Given the high degree of repeatability of SmartMeasurement ALMAG electromagnetic flow meters, a certain number of pulses is expected from the electromagnetic flow meter during each sample. If there was a variation from the normal count, the system automatically shut down and a new brix reading was taken.

Advantages:

• SmartMeasurement ALMAG electromagnetic flow meter is the centerpiece of a more modern sampler system that accurately measures the amount of juice concentrate that was transferred
• The ALMAG electromagnetic flow meters are a better alternative to mechanical-type flow meters due to their unobstructed flow tube.

Flow Measurement in Bakeries

When processing dough for bakeries the SmartMeasurement ALMAG electromagnetic flow meter is used to batch water and liquid sugar. The batches varied from the required 134 (61 Kg) pounds to over 200 Lb. (91 kg). Bad product qualities can occasionally ruin batches of dough. The ALMAG electromagnetic flow meters are used not only to measure the amount of water in the process but also the amount of liquid sugar. The liquid sugar for the dough is stored in a 7000-gallon outdoor storage tank heated to keep the contents at +85° F (+29° C). Temperature fluctuations cause fluid viscosity changes. The situation is worse in the winter, or whenever the heat tracing system is not operating. A drift in meter repeatability gradually increases the batch size from 134 (61kg) to 160 Lb. (73 Kg).

The SmartMeasurement ALMAG electromagnetic flow meters are used in this application effectively for two reasons. First, the flow rate is fairly constant. Secondly, the viscosity is relatively high (160 cP) and viscosity changes do not affect the accuracy of a magnetic flow meter.

Advantages:

• SmartMeasurement ALMAG electromagnetic flow meters are used for water, liquid sugar, and process dough measurement.
• The ALMAG electromagnetic flow meters are immune to changes in product viscosities.
• The ALMAG electromagnetic flow meters are a better alternative to mechanical-type flow meters due to their unobstructed flow tube.

Flow Measurement in the Permentation Process

The fermentation process produces heat and carbon dioxide. Carbon dioxide gas can be pressurized over 200 psig (14 barg) and liquefied and recovered to sell to the food & beverage or chemical industries. Food-grade CO2 is often used in the beverage industry for carbonation; industrial CO2 can be used as an industrial coolant and in the production of “dry” ice. This gas is oftentimes measured by the SmartMeasurement ATMF gas mass flow meters for optimum process monitoring.

The fermentation of corn products for alcohol allows the recovery and capture of CO2 vapor which is condensed and pressured to 215 psig (15 barg). The pressurization of the CO2 drops the temperature to as low as -140°F (-97oC) in liquid form. Liquefied CO2 is an ideal application for the SmartMeasurement ALCM Coriolis mass flow meters. By incorporating a Coriolis mass flow meter instead of a volumetric flow measurement, the customer can track the true mass of pressurized liquid CO2 during the filling process of trucks and rail cars. Several ALCM Coriolis mass flow meters can be simultaneously used for filling multiple tanker and rail cars.

Advantages:

• The SmartMeasurement ALCM Coriolis mass flow meter offers accurate load out of liquefied carbon dioxide for trucks and rail car applications. This installation has eliminated the need for costly weigh scales or frequent loading/unloading of tankers or rail cars to adjust the final shipping weights.
• SmartMeasurement offers a one-stop shop for all flow meter requirements in a fermentation process. ALCM series of Coriolis mass flow meters for liquefied CO2 and ATMF mass flow meters to measure CO2 gases.
• SmartMeasurement offers a variety of ALCM Coriolis mass flow meter flow tubes that can meet any centrifuge application.

Power and Utility

SmartMeasurement has many successful flow measurement applications in the power generation industries. Our ALSONIC-DSP family of non-intrusive ultrasonic flowmeters has been used for flow rate measurement of non-conductive plant feed water while the portable ALSONIC-DSPPL ultrasonic flowmeters have been used for maintenance spot checking applications. SmartMeasurement’s ALMAGWP electromagnetic flow meters are used in cooling water, heat exchangers, and plant water intake systems. The ATMF series thermal mass flow meters are used to measure combustion air to boilers, stack gas monitoring for pollution control requirements, and natural gas and biogas measurement in plant wastewater applications. The ALVT vortex flow meter family is used to measure steam and vapors throughout the power plants. SmartMeasurement provides a one-stop shop for all flow metering requirements in the utility power generation industries.

Pulverized Coal-Fired Boilers

The measurement and control of mill airflow in coal-fired boilers for optimum performance of pulverizing are measured with the SmartMeasurement ATMF air mass flow meters. The no-moving parts design prevents highly corrosive fly ash from clogging or fouling the flow meter. Measurement of airflow is important in controlling mill slugging, feeder runback, and coal spillage. Coal-fired boiler’s efficiency can be maximized by measuring and controlling steam flow with the SmartMeasurement ALVT vortex flow meters, and boiler exhaust (flue gases) with either the ALVT vortex flow meters or ATMF gas mass flow meters. To minimize emissions and maximize fuel response to the furnace, the ATMF gas mass flow meters with wide turn-down and high-temperature sensors.

Advantages:

• The SmartMeasurement ATMF air mass flow meters, with no moving parts and wide turn-downs, are used for combustion air systems as well as fuel gas to boilers.
• The SmartMeasurement ALVT vortex flow meters are an ideal choice for measuring and controlling steam boilers in the power industries.

Biogas from Landfills in Cogeneration Power Plants

Solid wastes from households, commercial, and industrial activities enter a landfill, where methanogen bacteria decompose the organic material. The by-product of bacterial decomposition is biogas composed of anywhere between 30-50% carbon dioxide and the remainder of methane gas. To collect this gas, a series of pipes are embedded within the landfill and are compressed and mixed with natural gas as fuel for power generation. Landfill gas is very humid, at low pressure (20-40 mBarg) and about 40-60°C (100°F).

Measuring the biogas as it leaves the landfill is difficult because it is dirty and has very low pressures. Low pressure makes differential pressure (DP) devices like orifice plates unsuitable since they require a fairly large differential pressure to operate. Moreover high moisture and particulate content can clog up devices like annubars and orifice plates and gum up turbine meters and similar instruments that have moving parts. The SmartMeasurement ATMF thermal mass flow meters, with no moving parts to clog with dirty, particulate-laden gas and a self-cleaning purge option for dirty flow environments, the ATMF thermal mass flow metes maintain accuracy and lower maintenance costs.

The ATMF thermal mass flow metes sensors automatically correct for changes in gas temperature and pressure, eliminating the need for separate temperature and pressure transducers.

Advantages:

• The SmartMeasurement ATMF biogas mass flow meters, with their no-moving parts wide turn-downs, and low-pressure drops are ideal for cogeneration power plants. Further blending with natural gas necessitates the use of ATMF mass flow meters for blending optimization.
• The SmartMeasurement ALVT vortex flow meters are an ideal choice for measuring and controlling steam boilers in the cogeneration power industries.

Geothermal Power Plant

Geothermal resources have been used as sources for cooking and heating. Today, geothermal power plants are producing over 8,200 megawatts of electricity that supplies over 60 million people in 21 countries. In a typical steam field, the geothermal reservoir rock consists of fractured greywacke and greenstone heated to a temperature of 460-480°F (237-250°C). The fractures are filled with superheated steam at pressures that, depending on location, can vary from 100 to 240 psig (7-16.5 Barg).

This superheated steam is collected at the wellheads and sent to an electrical generating station that consists of a heat exchanger a turbine and a generator set. Steam is typically delivered to the turbine at 70 psia and 300°F to 350°F, at a flow rate of approximately 890,000 lb. /hr. (400,000Kg/hr.) at maximum capacity. Because of high temperatures and varying pressures, measuring steam flow with a volumetric flow meter is not accurate.

Moreover, volumetric flow meters are particularly sensitive to the formation of scaling and plugging. The best-known solution to measure steam flow in this application is the SmartMeasurement’s ALVT-Mass vortex flow meters with integral temperature and pressure compensation. The ALVT-Mass vortex flow meter improves accuracy and reliability with lower installed costs because there is no need to install pressure and temperature devices as required with volumetric flow meters. Moreover, the relatively small surface area of the ALVT-Mass vortex flow meters insertion style in big pipes eliminates the large pressure drop associated with other flow meters.

The ALVT-Mass vortex flow meter sensors’ small surface area also equalizes quickly with the surrounding steam temperature, thereby eliminating scaling due to temperature differentials.

Advantages:

• The SmartMeasurement ALVT-Mass vortex flow meter comes with both insertion and inline configuration and is an ideal choice to directly measure the mass flow of steam in both very small to very large pipes.
• The SmartMeasurement ALVT-Mass vortex flow meter is a steam mass flow meter with integrated temperature and pressure transducers. The all-in-one system is far superior to the volumetric flow meter which requires other separate devices to measure mass flow.

Solar Thermal Energy (STE) Plants

STEs are becoming more economical, and the use of STEs to generate power is ever-increasing. Solar thermal electric energy generation concentrates the light from the sun to create heat, and that heat is used to run a heat engine, which turns a generator to make electricity. Various methods exist to concentrate solar radiation, including parabolic troughs, power towers with mirrors that track the sun, parabolic dishes, and Fresnel reflectors. A fluid (also called heat transfer fluid) like synthetic oil, molten salt, and pressurized steam passes through the receiver and becomes very hot. The fluid containing the heat is transported to a boiler to produce steam which can then be used in the process or to generate electricity.

The solar collector comprised a huge array of concave mirrors. These mirrors track the position of the sun throughout the day, focusing the sun’s energy on a black tube that runs along the focus of the array. This black tube is surrounded by a second glass tube vacuum chamber that protects it from the air, allowing it to absorb solar energy more effectively. As super-heated water passes through the black tube, the solar energy heats it to 450°F (232°C). Hot water is measured by the high-temperature ALVT vortex flow meters, while steam and condensate flow can be measured by the ALVT-Mass vortex flow meter in the system. The water then runs through a boiler system that uses its heat to generate steam.

Steam can be used to generate electricity or in certain manufacturing processes, it is also used to transfer heat to other processes like oils or other fluids. Cooled water flows back through the tube to the solar concentrator field will be measured by the ALMAGWP electromagnetic flow meters and the process is repeated.

The SmartMeasurement family of flow technologies can be a one-stop-shop for all the flow measurement requirements in Solar Thermal Energy plants, regardless if the process is used to generate electricity or used as a heat-transfer fluid to heat other process fluids.

Advantages:

• The SmartMeasurement family of flow technologies can be a one-stop shop for all the flow measurement requirements in Solar Thermal Energy plants.
• ALVT-Mass vortex flow meters are used for mass flow measurement of steam, hot liquids, and superheated water as the heat transfer fluid out of the solar collectors.
• The SmartMeasurement ALMAGWP electromagnetic flow meters are used to measure cooled water flowing back to the solar collectors.

Steam Production Using Waste Methane Gas from Manure Digesters

The usage of small electrical power plants using waste gas is increasing in the developed world. Manure is collected from farms and placed in a biogas digester. Biogas digester efficiency can be increased by measuring the manure going into the digester with the ALMAGWP electromagnetic flow meters, while the production of biogas can be measured by the ATMF biogas mass flow meters. Moreover, digester systems use air to increase the decomposition of manure into biogas. The air is measured by the ATMF air mass flow meters.

Advantages:

• The SmartMeasurement ATMF biogas mass flow meters, with their no-moving parts wide turn-downs, and low-pressure drops are ideal for waste gas power plants. Further digester systems use air to increase the decomposition of manure into biogas and therefore the ATMF air mass flow meters are an ideal choice.
• Manure going into the digester is measured with the ALMAGWP electromagnetic flow meters.

Hydrogen Flow Monitoring

Hydrogen is a commonly used cooling agent in power plant turbine generators. Leaking hydrogen gas can pose a safety concern in the power plant. The SmartMeasurement ATMF gas mass flow meters detect an increase in usage; thereby alerting operators of leaks. In addition to monitoring for hydrogen leaks, plants need to measure the flow rate for custody transfer billing verification from the gas supplier to the utility. Also, multiple plants typically draw from a common hydrogen supply by using the SmartMeasurement ATMF gas mass flow meters inline unit. The SmartMeasurement ATMF gas mass flow meters measure the flow at each location so that each plant can be monitored for its appropriate share of hydrogen usage.

Advantages:

• The SmartMeasurement ATMF hydrogen gas mass flow meters are used to measure the hydrogen gas in the turbine generation cooling system.

Boiler Control System

Combustion air is brought through forced draft fans and/or induced drag fans to preheaters which heat the air to an optimum temperature before it enters the boiler. The air ducts are divided into primary air and secondary air ratios as the fuel load requires. The ratio of the mass flow of fuel to the mass flow of air is crucial to the combustion efficiency of the boiler. Optimum efficiency of the preheater is monitored by knowing the mass flow of air before and after the preheater. The SmartMeasurement ATMF air mass flow meters are the instrument of choice to use both in primary and secondary air ducts to optimize the air-to-fuel ratio of a boiler.

Advantages:

• The SmartMeasurement ATMF air mass flow meters are the instrument of choice to use both in primary and secondary air ducts to optimize the air-to-fuel ratio of a boiler.

Boiler Feed Water System

Feed water used in steam boilers of fuel-burning power stations is highly purified to avoid corrosion. Due to its high purification level, it becomes an electrical insulator eliminating the possibility of measuring flow with electromagnetic meters. The most optimum solution to measure feed water is, the Alsonic family of ultrasonic flow meters, the clamp-on meters can measure the flow of liquids regardless of their electric conductivity. Moreover, an expensive plant shutdown is not required to install SmartMeasurement Alsonic ultrasonic flow meters. The flexibility of our portable and fixed-installation flow meters enables them to be used at many different parts of a power station, for many different liquids, and on pipes of almost every common material and diameters from 10 mm to over 3,000 mm (0.4” > 118”). Other applications such as Feed water, cooling water, condensate flow metering, pump, valve and inline flow meter performance verification, leakage, and blockage detection, metering of fly ash disposal lines, and heavy fuel oil metering.

Advantages:

• The SmartMeasurement Alsonic family of ultrasonic flow meters, the clamp-on meters are used to measure boiler feed water. Electromagnetic flow meters cannot measure feed water due to its limited electrical conductivity.
• The SmartMeasurement Alsonic family of ultrasonic flow meters are also successfully used in cooling water and condensate flow metering, pump, valve, and inline flow meter performance verification, leakage, and blockage detection, metering of fly ash disposal lines, and heavy fuel oil metering.

Flue Gas Recirculation

The SmartMeasurement ATMF air mass flow meters are used to optimize the operation of a boiler that incorporates flue gas recirculation. Flue gas is recirculated to maintain optimum furnace temperature and lower soot emissions. Gas recirculation flow measurements are needed to calculate the optimum recirculation flow needed to maintain the correct furnace exit temperature. The flue gas is recirculated from the economizer outlet to the furnace through tempering ports located above the top level of burners.

Advantages:

• The SmartMeasurement ATMF air mass flow meters are used to optimize the operation of a boiler that incorporates flue gas recirculation.

Flue Gas Balancing

Combustion exhaust gas (flue gas), which contains by-products harmful to the environment must be cleaned before release to the atmosphere. When fly ash-laden flue gas flows from one or more boilers to multiple scrubber modules, a serious problem arises in balancing the flow to the modules so that each operates at its maximum efficiency. Poor scrubber performance increases the mass flow of pollutants to the atmosphere, clogs mist eliminators or re-heaters, and causes corrosive damage to downstream components. Often Pitot tubes, annubars, or Venturi meters are used to monitor the mass flow which must have pressure, and temperature sensors as well as a flow computer. The build-up in these meters will alter the pressure drop as much as changes in flow. Since these devices are DP-type instruments, power plant personnel have no reliable way of knowing how much flue gas is flowing in each scrubber module because changes in pressure are used to infer flow rates in these devices. The SmartMeasurement ATMF air mass flow meters outfitted with a shield to guard against build-up will provide consistent and reliable mass flow data.

Advantages:

• The SmartMeasurement ATMF air mass flow meters outfitted with a shield to guard against build-up will provide consistent and reliable mass flow data.

Stack Gas Control

Stack gas controls are extremely important to measure the amount a plant exhausts to the atmosphere. Since the SmartMeasurement ATMF air mass flow meters are direct mass flow instruments, pollution control officials will be able to determine the mass flow of the exhaust, instead of inferring mass flow by using other techniques.

Advantages:

• The SmartMeasurement ATMF biogas mass flow meters, with their no moving parts, wide turn-downs, and low-pressure drops are ideal for cogeneration power plants. Further blending with natural gas necessitates the use of ATMF mass flow meters for blending optimization.
• The SmartMeasurement ALVT vortex flow meters are an ideal choice for measuring and controlling steam boilers in the cogeneration power industries.

Fuel Flows

Gas fuel, usually natural gas is distributed to boiler burners where it is burned through a gas ring. The gas ring enables the gas to mix with incoming combustion air for more efficient burn. The SmartMeasurement ATMF air mass flow meters for gases and air can be monitored to determine combustion efficiency.

Accurate flow measurement of combustion fuel and air has always played a major role in the overall performance and efficiency of a boiler. Since the oil embargoes of the 1970s, and more recently the increased government emission regulations, the need for accurate flow measurement has never been more pronounced. These forces drive the need to monitor flow and make judicious choices in the type of measurement used. While traditional technologies such as DP and turbines have performed dutifully in the past, because of the number of advantages offered, customers are now using the SmartMeasurement ATMF mass flow meters whenever mass gas flow is required.

Advantages:

• The SmartMeasurement ATMF biogas mass flow meters, with their no moving parts, wide turn-downs, and low-pressure drops are ideal for cogeneration power plants. Further blending with natural gas necessitates the use of ATMF mass flow meters for blending optimization.
• The SmartMeasurement ALVT vortex flow meters are an ideal choice for measuring and controlling steam boilers in the cogeneration power industries.

Cooling Water System

Power Generation systems usually invest several hundred million dollars in retrofit equipment to minimize the amount of cooling water drawn from the water source generally an ocean or a lake. These are generally a closed-loop system that retrofits the piping already in place. To further optimize their cooling systems, the engineering team identifies the need for a liquid flow meter at multiple locations to measure the flow of water as it passes through the system. Accurate liquid flow measurement is necessary not only for operational purposes to support the cooling towers but also to determine the system’s influence on the bay’s marine life.

The SmartMeasurement family of ALMAG electromagnetic flow meters provides an ideal solution for service in small to large-scale liquid measurement applications such as cooling tower water systems at electric power generation plants. They are the industry’s most economical electromagnetic flow meters. Moreover, it is not uncommon for electric power generation plants to have complex pipe configurations that may require bi-directional flow measurement. The SmartMeasurement ALMAG electromagnetic flow meters are available with bi-directional flow measurement. Bidirectional flow meters display positive and negative totalized flow or the option of displaying a net totalized flow measurement.

Advantages:

• The SmartMeasurement family of ALMAG electromagnetic flow meters provides an ideal solution for service in small to large-scale liquid measurement applications such as cooling tower water systems at electric power generation plants.

Flue Gas Treatment Plants

In flue gas treatment operations such as power plants, liquid flow meters are used to measure the amount of circulation water. This water washes combustion (exhaust) gas and flows through the heat exchangers taking the heat from the exhaust gas. The exhaust gas is measured by The SmartMeasurement ATMF gas mass flow meters.

This heat is then used for district heating. Combustion gas comes from the plant’s boiler which converts steam into district heating and also drives its electric power generators. The washing of the exhaust gas eliminates many of the pollutants that would otherwise contaminate the air. The heat recovery from the gas will increase the efficiency of any power plant. In power plants, accurately measuring the flow of liquids is always a top priority for operational efficiency. Precise flow measurement is essential to control costs and maintain profitable plant operations. Engineers generally specify one of two solutions in this type of energy plant liquid flow application: ALMAGWP electromagnetic flow meters or orifice flow measurement.

Depending on piping, and ease of installation requirements, SmartMeasurement family flow technologies give instrument engineers many choices depending on their unique circumstances. When spacing is tight, SmartMeasurement family clamp-on ultrasonic flowmeters are used, if flow conditioning is required, the SmartMeasurement ACONE is specified. Instrument engineers are delighted to find a flow meter manufacturer company such as SmartMeasurement that can give them choices of many flow technologies that can satisfy their technical and/or economic constraints.

Advantages:

• SmartMeasurement family flow technologies give instrument engineers many measurement choices unique to their individual application circumstances.
• SmartMeasurement ACONE differential flow meters condition the flow with only 1-2 diameters thereby negating having long straight runs to condition the flow.

Portable Liquid Flow Measurement for Maintenance and Inspection

Oftentimes times regular spot measurements with portable flowmeters are required as part of maintenance and inspection work. In a power plant, measurement points can be difficult to access, pipes cannot be opened, and flows are not interrupted. Therefore, a non-invasive and non-intrusive flow measurement is used as a spot-check flow measurement, where a permanent flow meter is not required.
In such cases, the SmartMeasurement ALSONIC-DSPPL, portable ultrasonic flowmeters become the instrument of choice. The ALSONIC-DSPPL is the only portable ultrasonic flowmeter that can measure up to 30% bubbles and solids. Unlike other portable ultrasonic flow technologies the SmartMeasurement ALSONIC-DSPPL, portable ultrasonic flowmeters can measure any liquid be it fuel flow, wastewater, or water flow.

SmartMeasurement ALSONIC-DSPPL clamp-on ultrasonic flowmeters can be used on various types, functions, and sizes such as Inline flow meter performance verification, Inspection of fire extinguisher systems, Pump and valve testing and inspection, Leakage and blockage detection, etc.

Advantages:

• SmartMeasurement ALSONIC-DSPPL clamp-on ultrasonic flowmeters can be used on various types, functions, and sizes such as Inline flow meter performance verification, Inspection of fire extinguisher systems, Pump and valve testing, and inspection, Leakage and blockage detection, etc.

Marine

SmartMeasurement’s flowmeters have been used successfully in a variety of marine applications. Our Positive Displacement Flow meters such as the ALRBPD Series have been used for fuel monitoring onboard ships; the ALMAGWP magnetic flow meters have been used in onboard reverse osmosis systems; portable ultrasonic meters such as the ALSONIC-DSPPL have been used for spot-checking any liquid flows having less than 30% bubbles/solids. The ALBPD positive displacement meter has also been used offshore for fuel loading and unloading. Smartmeasurement™ will continue to update our application examples in the Marine area.

Fuel Flow for Shipping Propulsion Plant

SmartMeasurement has been a supplier of flow products to many shipyards throughout the world. This includes flowmeters and flow switches for several shipboard applications such as fuel flow measurement systems with the ALBRPD bi-rotor meter positive displacement flow meter for the propulsion plant. The ALBRPD provides an ideal solution for fuel flow monitoring due to the limited space available in a Ship. Positive displacement flow meter doesn’t require straight-run piping and therefore can work well after piping bends. Moreover, the high accuracy of 0.2% (also available with 0.1% accuracy) as well as its ability for bi-directional measurement makes it ideal for custody transfer applications where excess fuel is transferred back to the shipyard.

Advantages:

• The ALBRPD provides an ideal solution for fuel flow monitoring due to the limited space available on board vessels. The ALBRPD doesn’t require any straight runs.
• High accuracy of 0.2% or 0.1% of reading.
• Accessories such as filters (strainer), air/gas eliminators, flow computers, and batch controllers are available for complete solutions.

Reverse Osmosis

Large ships use Reverse Osmosis (R/O) systems for “all” shipboard water requirements. SmartMeasurement has been supplying the ALMAGWP electromagnetic flow meters used on both the supply and discharge sides of the R/O systems. The supply side flowmeters are suitable for use on seawater, thus, they are lined with PTFE, which provides long life against seawater’s corrosive nature.

The flowmeters on the discharge can have the less expensive rubber liners and it can also measure the potable water. All flowmeters will supply simultaneous pulse and analog outputs that will be fed to the ship’s main control room. The measurement obtained from the supply and discharge flowmeters on the R/O plant enables the crew to determine the efficiency of the R/O system.

Advantages:

• The ALMAGWP electromagnetic flow meters have multiple uses during the reverse osmosis process for both inlet and outlet of the system.
• Various non-corrosive liners are available.

General Flow Meter Requirements Onboard Ships

Large ships can contain thousands of meters of pipe work carrying various fluids such as water, wastewater, cooling and heating liquids, fuel, and oil. While the fuel flow measurement can be done with SmartMeasurement’s ALBRPD positive displacement flow meter, water, wastewater and cooling/heating measurement can be done with SmartMeasurement’s ALMAGWP, electromagnetic flow meters in some cases the permanent metering of lines becomes necessary once the ship has entered operation.

Often regular spot measurements with portable units are required as part of maintenance and inspection work. Ship applications are characterized by the fact that measurement points are often difficult to access, pipes cannot be opened, and flows are not interrupted. Therefore, a non-invasive and non-intrusive flow measurement throughout the ship’s entire lifetime cycle from construction and commissioning to offshore operation and dockyard overhauls is needed.

In such cases, the SmartMeasurement ALSONIC-DSPPL, portable ultrasonic flowmeters become the instrument of choice. The ALSONIC-DSPPL is the only portable ultrasonic flowmeter that can measure up to 30% bubbles and solids. Unlike other portable ultrasonic flow technologies the SmartMeasurement ALSONIC-DSPPL, portable ultrasonic flowmeters can measure any liquid be it fuel flow, wastewater, or water flow. SmartMeasurement ALSONIC-DSPPL clamp-on ultrasonic flowmeters can be used on vessels of various types, functions, and sizes. Vessels can be container ships, cruise liners, ferries, tankers, aircraft carriers, or even luxury yachts. Other ALSONIC-DSPPL applications can be Inline flow meter performance verification, Inspection of fire extinguisher systems, Pump and valve testing and inspection, Leakage and blockage detection, etc.

Advantages:

• SmartMeasurement provides a one-stop shop for all flow requirements in marine applications. ALSONIC-DSPPL ultrasonic flowmeters for spot-checking any liquid flow, the ALMAGWP electromagnetic flow meters for wastewater and reverse osmosis processes, and the ALBRPD positive displacement flow meter for fuel systems.

Marine Loading

With each transaction involving large volumes of products and many millions of dollars, measurement accuracy is more significant in marine loading transfers than in any other application. Accuracy and reliability are required for Floating Production, Storage, and Off-Loading. In FPSO metering systems, SmartMeasurement technologies have the experience and products to ensure operational integrity. SmartMeasurement ALBRPD bi-rotor meter positive displacement flow meter provides an ideal solution for FPSO metering. The ALBRPD positive displacement flow meter with its high accuracy and bi-directional measurement capabilities performs an outstanding performance both in loading and unloading applications.

Advantages:

• The ALBRPD provides an ideal solution for Floating Production, Storage, and Off-Loading (FPSO) metering. The ALBRPD doesn’t require any straight runs.
• High accuracy of 0.2% or 0.1% of reading.
• Accessories such as filters (strainer), air/gas eliminators, flow computers, and batch controllers are available for a complete solution.

Ballast Water Treatment Systems

Ballast water is used to stabilize vessels when not fully loaded. Water transfers from one port and is released at another port which introduces non-indigenous organisms into fragile ecosystems. Untreated ballast water is now highly regulated and therefore vessels must install a ballast water treatment system. Traditional mechanical flowmeters are negatively affected by ballast water due to the presence of mussels, sand, and other particles. This limits the lifespan of the meter and results in increased maintenance and replacement costs. SmartMeasurement has been supplying the ALMAGWP electromagnetic flow meters due to its minimal pressure loss as well as its no moving parts to prevent constant replacement of the flowmeters in this application. A highly abrasion-resistant sensor liner material makes the ALMAGWP ideal for this application.

Advantages:

• The ALMAGWP electromagnetic flow meters are an ideal choice for the marine ballast water treatment system.
• Highly abrasion-resistant sensors and liners are available with the ALMAGWP electromagnetic flow meters. Metal and Mining

Metals & Mining

SmartMeasurement’s flowmeters have been installed successfully in several metal and mining industry applications. Our ALBRPD Series Positive Displacement Flow meters have been used for fuel monitoring in remote mining applications where external power is not available. The ALMAGWP Series Electromagnetic Flowmeter has been used to monitor the Hydro cyclone feed process while our ALCM-UT mass flow meter has been used for flow and density measurement in smelting furnaces. Smartmeasurement™ will continue to update our application examples in the Metal and Mining Industries section.

Fuel Flow Monitoring

Most mining activity occurs in remote locations, miles from the nearest conventional sources of power. Mining operations also entail the bulk movement of earth and minerals on a massive scale. In the vast majority of these operations, electric power is generated on-site via diesel engine-driven generators and/or steam-driven generators.

Diesel fuel can only be brought into the mining sites in bulk at specific times of the year. Mines located in the polar or near-polar regions can only bring in fuel when the ground is frozen to the point that the soil will support the weight of the transport trucks. However, the transportation cycle must be completed before the full onslaught of winter conditions that make such transport overland extremely hazardous if not impossible. Diesel fuel is also a hazardous material in terms of accidental release into the environment and is often regulated as such by local jurisdictions.

The fuel is received on-site and transferred from bulk storage facilities to individual points of use in the power generation plant and a second application at dispensing points for fueling the mobile equipment. These applications were all ideal matches. SmartMeasurement fuel flow meter, which can be either the ALBRPD positive displacement meter or ALCM-UT mass flow meter. The choice of which type of flowmeter depends on the flow range and more importantly cost. The ALBRPD Positive displacement flowmeter is generally less expensive and doesn’t need external power than the ALCM-UT mass flowmeter should the requirement be to measure the total mass of the fuel.

SmartMeasurement fuel flow meter can be installed on all bulk fuel receiving lines. In storage tanks, air/gas can accumulate within a flow stream which must eliminated before fuel measurement and therefore these systems are equipped with air eliminators, the ALPDG, supplied by SmartMeasurement. These flow meters are used to verify the actual fuel received from the tanker trucks.

Two main distribution lines from a tank farm feed fuel to various secondary tanks that are located at various stations in the mine. The ALBRPD positive displacement flowmeter is installed on these two distribution lines which allows the mine to track their main fuel inventory. (Fuel received versus fuel transferred). These include heavy equipment refueling stations, along with boiler fuel consumption applications in the powerhouse. These flowmeters allow the mine to track the fuel each department uses. The flowmeters were calibrated for the average viscosity of P40 diesel fuel oil @15°C.

Advantages:

• The ALBRPD provides an ideal solution for fuel flow monitoring where no external power is available.
• Accessories such as filters (strainer), air/gas eliminators, flow computers, and batch controllers are available for complete solutions.

Steel Mills

The ALBRPD positive displacement flowmeter is used to monitor oil spray on the top and bottom of a continuous feed steel sheet for quality assurance and optimization of oil coating. In addition, to monitor the return flow of unused oil to a storage tank to provide the total oil used. Steel manufacturers use oil at various stages in the process of making steel. Some examples of specific uses follow: Oil, in combination with water, may be used as a cooling agent to quench steel that has been subjected to intense heat. It may be applied to the surface of steel for rust protection or to prevent scoring in case the steel rubs together.

An oil supply monitoring system used in the sheet steel industry should be accurate, and repeatable, but above all, it must be reliable. Lack of oil on the steel sheets during processing may result in the failure of the processing machinery causing expensive downtime or poor-quality steel. The flow monitoring system must measure the total spray via multiple lines and the excess oil collected in the sump and returned to storage. With accuracies of either 0.2% or 0.1%, the ALBRPD bi-rotor meter positive displacement flowmeter is an ideal choice for oil measurement.

Advantages:

• The ALBRPD provides an ideal solution for fuel flow monitoring where no external power is available.
• Accessories such as filters (strainer), air/gas eliminators, flow computers, and batch controllers are available for complete solutions.

Hydrocyclone Feed in the Mining Industry Using ALMAGWP Electromagnetic Flow Meters with Ceramic Liner

Hydrocyclones are used for the classification of particles in slurries. Light particles are removed with the overflow stream by an upward swirling flow through the vortex finder, while heavier particles are removed with an underflow stream by a downward swirling flow. The particle size of the cyclone feed slurry ranges from 250-1500 microns leading to high abrasion. The flow of these slurries has to be reliable, accurate, and responsive to changes in the plant load. This enables to balance of the plant load and plant throughput. In addition to this, the service life of the flowmeter is essential to minimize maintenance and replacement costs. The flowmeter sensor has to withstand major abrasive wear caused by this kind of slurry as long as possible.

The SmartMeasurement ALMAGWP electromagnetic flow meters with a ceramic liner and ceramic or titanium electrodes are an ideal solution for this application with the bonus of reducing replacement intervals significantly. ALMAGWP has been chosen as the flowmeter system resulting in best-in-class measurement and service life performance. The rugged ceramic liner material provides excellent abrasion resistance while the durable Tungsten carbide electrodes minimize signal noise. A protection ring (grounding rings) at the inlet of the flowmeter can be used to maximize the service life of the sensor protecting the liner material from abrasion due to differences between the inner diameter of the flowmeter and the connected pipe. ALMAGWP‘s most advanced electronic filtering technology separates the signal from the noise without losing responsiveness to changes in the flow rate.

Advantages:

• ALMAGWP electromagnetic flow meters with a ceramic liner and various choices of electrodes from ceramic to titanium or tungsten carbides can withstand corrosion and high-noise environments which makes them ideal for Hydro cyclone systems.
• ALMAGWP‘s most advanced electronic filtering technology separates the signal from the noise without losing responsiveness to changes in the flow rate.

Mass Flow Meter in Smelting Furnaces

In the zinc manufacturing process compounds such as sodium hydroxide must be measured. Hydroxides must be processed and pretreated in washing plants to ensure that the smelting process achieves the best results. The SmartMeasurement Coriolis Mass Flow Meter is an outstanding flowmeter for this process. The process involves 50 % NaOH concentration, if used at full concentration, the reaction is too fast and the control on the pH is too uncertain: Therefore it is diluted with water up to a 20 % concentration. The high and stable quality and concentration of the 20% NaOH is decisive for constant control. If this parameter is not controlled, the in-stream, polluted water can influence the pH value negatively and damage the production. Changes in density which means changes in concentration must be accurately monitored.

There is a direct relation between density and concentration, the density is the lead for the % NaOH (sodium hydroxide). The density for 50% NaOH is about 1.52 kg/dm³, diluted to 20% it’s about 1.25 kg/dm³ (linear behavior). With this dilution, the control of the pH is perfect. The addition of a reagent gives the best result when the density is controlled with an accuracy of 2 g/l or better. The SmartMeasurement Coriolis Mass Flow Meters provide a very accurate and stable density as well as mass flow signals, ideal for any control processes based on density.

Advantages:

• SmartMeasurement Coriolis Mass Flow Meters are provided with various flow tube designs and are an ideal choice to accurately measure both flow and density simultaneously.

Crude Oil and Gas Production

Oil and Gas customers have several technology choices to measure flow, often a mass flow meter such as SmartMeasurement ALCM family of Coriolis flow meters which can measure both density and mass flow is an ideal choice. Oil in water application which not only measures the percentage of water in oil, but total oil flow and water flows can be monitored with SmartMeasurement ALCM family of Coriolis flow meters.

The ALCM Coriolis flow meters require almost zero maintenance as there are no moving parts that can cause wear and tear. Even high percentages of entrained gas does do not affect the meter life span. The meter operates even at gas levels of 40 … 50%. After proper installation, the meter accuracy can be verified as below 5% making it significantly more accurate than conventional turbine meters. Additional features such as built-in density or concentration measurement allow for further well analysis or net-oil or water-cut calculations.

SmartMeasurement ALCM family of Coriolis flow meters reduces measurement maintenance by up to 90%. The ALCM saves well investments as it gets additional insight into the well by providing more variables and gives superior accuracy. Is still operating at 40-50% of gas entrainment, when most other flowmeters fail. The water outlet of the separator can be measured with the SmartMeasurement ALMAG family of electromagnetic meters offering low maintenance with conductive liquids.

Advantages:

• The ALCM Coriolis flow meters can measure liquid flow even with up to 50% gas concentration. It also provides both mass flow and density measurements.
• SmartMeasurement ALMAGWP electromagnetic meters can measure the water outlet of separators in crude productions.

Crude Oil Wellhead

Large size Coriolis flow meters SmartMeasurement ALBRPD Positive Displacement flow meter is an ideal flow meter to measure crude oil from wellheads. SmartMeasurement technologies continue to develop measurement solutions that reliably perform in the harshest onshore landscapes. The potentially harmful effects of entrained gases, sediment, water, and chemicals are all factors that must be effectively mitigated through proper operations and processes. Therefore SmartMeasurement ALPDFT filter and the ALPDGE gas eliminators are used to condition the crude to be accurately measured by the ALBRPD Positive Displacement flow meter.

Advantages:

• The ALCM Coriolis flow meters can measure liquid flow even with up to 50% gas concentration. It also provides both mass flow and density measurements.
• SmartMeasurement ALMAGWP electromagnetic meters can measure the water outlet of separators in crude productions.

Drilling Muds

Drilling mud is often stored in tanks/silos. SmartMeasurement ALCM family of Coriolis flow meters is used in the online mixing and blending of expensive mud (WBM and OBM) as well as in custody transfer measurement with accuracies of 0.1% at the point of transfer to supply ships and mud tanks on site. The online measurement of density and viscosity keeps the mud parameters constant.

Advantages:

• The ALCM Coriolis flow meters can measure drilling mud at a custody transfer accuracy of 0.1% as well as measure its density.

Cementation

To ensure excellent cement quality for the batch, the SmartMeasurement ALCM family of Coriolis flow meters monitors the flow rate online as well as the pumped cement density. Every drop of a chemical additive is quantified with the highly accurate ALCM family of Coriolis flow meters which are available for sizes of 10-200mm (1/2-8”).

Advantages:

• The ALCM Coriolis flow meters can measure both mass flow and density of cement to ensure accurate quality in the cementation process.
• ALCM Coriolis flow meters can measure expensive liquid additives which requires very accurate measurement is also the flow meter of choice with its accuracy of 0.1%.

Fracking

The online blending of frack jell is monitored and implemented by using the SmartMeasurement ALCM family of Coriolis flow meters for mass flow, density, and online viscosity measurement. Moreover, fracking requires very high-pressure fluids to be injected in the wells and therefore SmartMeasurement of family Differential Pressure transmitters the ALDPT, can measure process operation of up to 15,000 psi (1,000 bar). The ALDPT-MV smart Differential Pressure transmitters have an integrated thermocouple and store all adjustments and settings in an integrated memory chip. All data from all the fracking units involved in the process are visualized and recorded to set points, and calculations, and act as an independent PLC and communication unit.

Advantages:

• The ALCM Coriolis flow meters are used for online blending of frack jell for both mass flow and density requirements.
• For very high-pressure fluids of up to 15,000 psi (1,000 bar), the ALDPT-MV smart Differential Pressure transmitters are used to monitor fracking fluids.

Water and Steam Injection in Wellheads

Water or steam injection in wellheads is used to bring up residual crude when wellheads are nearing their operation limits. SmartMeasurement ALVT family of Vortex steam flowmeters with integrated mass flow computer and temperature measurement allows for direct cost control of the individual injection process to the various wells. All injection parameters like pressure, temperature, flow rate, and energy consumed can be transmitted to the control room via its MODBUS communication. It provides bidirectional communication, allowing you to call the well via mobile phone and check, for example, the flow rate at any time. Optional alarm settings can be activated if the wells are producing above or below a set point.

If the process requires high-pressure water injection, then SmartMeasurementALMAGHP high-pressure magnetic flowmeters can be used in a similar fashion steam injection. Liquid solutions of up to 420 bars (6000 PSI) are injected into wellheads to bring up residual crude oil from the wellheads. However magnetic flow meters only measure flow and pressure monitoring must be done separately with SmartMeasurement ALDPT Differential pressure transmitters.

Advantages:

• SmartMeasurement ALMAGHP high-pressure magnetic flowmeters are used for high-pressure liquid injection to low-producing wellheads.
• Where steam injection is used instead of liquids, SmartMeasurement ALVT integral mass flow vortex with integrated pressure and temperature is used.

Satellite and Pump Station

One of the costliest areas of separation and pipeline pumping is the expensive demulsification and Drag Reduction Additives (DRA) injected to support demulsification and reduce pipeline drag. Optimal use of these chemicals in parts per million (ppm) quantities ensures the lowest operating expenses and best process performance with good separation and higher pipeline flow rates. SmartMeasurement ALCMDT family of very small-sized Coriolis flow meters can measure mass flow rates at a very low 12Kg/hr. thereby accounting for every drop of the chemical injection.

Advantages:

• SmartMeasurement ALCMDT family of very small sized of ⅛” (3mm) Coriolis flow meters can measure mass flow rates at a very low 12 Kg/hr. ensuring that every drop of expensive chemicals during the demulsification process in satellite pumping stations.

Fuel Storage Tanks

Fuel storage facilities are usually third-party enterprises that act as a supplier of light hydrocarbons and also as storage facilities for others. The flow meter of choice must be a technology that has accuracies that can qualify for custody transfer. There is also a considerable amount of bias by facility engineers in choosing the appropriate flow technology due to their experience in a given technology. SmartMeasurement manufactures two technologies that can comply with custody transfer requirements. These are the ALCM Coriolis flowmeters and ALBRPD positive displacement meters which have accuracies of either 0.2 or 0.1% of the rate.

One major customer decided to utilize SmartMeasurement ALBRPD positive displacement meters extensively for custody transfer as well as for “balancing” their storage facilities. Normally Positive displacement meters are much cheaper than Coriolis flowmeters and customers would forgo the versatility of the Coriolis meter for the lower costs of the Positive Displacement flowmeters. Balancing a particular storage facility accounts for product removed and product that has been added to a storage tank. This type of application requires a bi-directional ALBRPD positive displacement flowmeter that is extremely repeatable over some time, is accurate, and can tolerate the service conditions. Many of the applications in a storage tank facility are more challenging in that the product is very dry without the usual lubricating properties associated with hydrocarbon products.

One flow application that presented particular problems in terms of measurement was for very dry, ultra-pure isobutene coming straight out of the dryer. Facilities that use turbine flowmeters which also can be used for custody transfer complain that turbine blades due to wear and tear are replaced many times within four months. The ALBRPD positive displacement flowmeter is a bi-directional flowmeter with a robust construction of both the rotor and blade and can last much longer than a turbine meter. If cost is not a major constraint, SmartMeasurement ALCM Coriolis flowmeters are an instrument of choice because it doesn’t have any rotors or bearings. Since storage tanks can accumulate air/gas and perhaps particulates, not conditioning the flow before using a flowmeter can cause the flowmeter to malfunction. To solve this problem SmartMeasurement can offer the ALPDFT filter to filter any particulates as well as the ALPDGE air/gas eliminators.

Advantages:

• Fuel storage tanks use either SmartMeasurement ALCM Coriolis flowmeters or ALBRPD positive displacement meters which have accuracies of either 0.2 or 0.1% of the rate. Their choice depends on the cost and/or technology bias of the operating engineers.
• Storage tanks will always accumulate gas and particles. Before measuring this fluid customers can use the ALPDFT filter/strainers and the ALPDGE air/gas eliminators to eliminate gas or particles before measurement.

Leak Detection in Pipeline

SmartMeasurement supplies many non-intrusive flowmeters to the petroleum pipeline industry for leak detection and spot-checking flows. Custody transfer applications are addressed with SmartMeasurement ALCM Coriolis flowmeters or the ALBRPD positive displacement flowmeter, however leak detection flow applications, for checking the integrity of the pipeline, can be addressed with the an ALSONICDSP clamped-on ultrasonic flowmeters. While the ALSONICDSP ultrasonic meters don’t have the custody transfer high accuracies, accuracies of 0.5-1% are for leak detection a single pass method will suffice.

Ultrasonic flowmeters provide multiple advantages when compared to in-line positive displacement or Coriolis flowmeters. These advantages include low cost both in terms of initial purchase and installation which requires no process shut-down or cutting the pipe. Other advantages are no pressure drop, can easily be replaced minimal potential points of leakage, and avoidance of high pumping costs. Additionally, ALSONICDSP ultrasonic meters can measure velocities as low as 0.02mps to as high as 12mps. This allows pipeline companies to move a maximum amount of product in the shortest time possible.

Leak detection and pipeline integrity are not only essential to the bottom line for the pipeline company, but they are also an environmental issue. Many of the petroleum products being measured include the additive MTBE. Proper selection of the flowmeter seal is essential for any application; however, is sometimes more challenging with various additives factored into the equation. The ALSONICDSP because of its non-intrusive ultrasonic measurement technique and no moving parts which could corrode, wear out, or be blocked is an ideal flow meter for leak detection. Additionally, both the ALSONICDSP transmitter enclosure and clamp-on sensors are manufactured with non-corrosive transducers and electronics allowing it to be operated within extreme atmospheric conditions as found on offshore platforms or desserts. The transducers operate in pipe diameters from 10mm up to over 3,000mm (0.4” > 118”) and withstand pipe temperatures of up to 120°C and more. They are capable of measuring through pipe walls of any thickness including very thick-walled steel conduits (SCH XXS).

Advantages:

• ALSONICDSP ultrasonic meters can measure velocities as low as 0.02mps to as high as 12mps is an excellent choice for leak detection applications.
• The ALSONICDSP transmitter enclosure and clamp-on sensors are manufactured with non-corrosive transducers and electronics which allows it to be operated within extreme atmospheric conditions as found on offshore platforms or deserts.

General Ultrasonic Flowmeter Measurement

SmartMeasurement ALSONICDSP ultrasonic flowmeters are also used to monitor the flow of liquids related to oil and gas exploration and processing such as methylamine, trimethylene glycol, methanol, water, and produced water. The latter is particularly important to guarantee the compliance of offshore drilling facilities with the OPPC (Oil Pollution Prevention and Control) regulations.

Advantages:

• ALSONICDSP ultrasonic meters are extremely versatile and can be used to temperate or fix measurements of many liquid additives used in refineries.

Flare Gas Mass Flow Measurement

In a variety of oil production and refining environments, SmartMeasurement ATMF mass flow meters monitor total gas flow to flare stacks as well as through feed lines to the main flare header. As an integral part of energy conservation and emission control systems, it meets strict accuracy and wide turndown requirements. SmartMeasurement ATMF is highly reliable because of its durable construction and no-moving parts design. Other uses are blower and louver adjustment for smokeless flares. A packing gland option permits hot-tap installation and retraction of the flow element without system shutdown. The ATMF also features high flow range turndown ratios up to 1000:1 and micro-processor-based user-friendly electronics.

Offshore Lease Operators are now required to account for flare and vent gas volumes from deep water offshore facilities processing more than 2000 bpd. Federal Regulation – Title 30 Part 250, Subpart K defines these requirements and the timeline for implementation. Accuracy is required to be 5%. While ultrasonic flare stack measurement offers better accuracies, its cost of several times more than SmartMeasurement ATMF mass prohibits it as an economical solution for flare measurement. Unlike conventional flow measurement requirements, flare/vent gas measurements present unique challenges in terms of range-ability and response to changing flow extremes.

During normal platform operations, flows are usually low. Depending on header size, discharge velocities are usually under 1 f/s (60 SFPM). However often these flow rates can flare up to over 300 f/s (18,000 SFPM). The wide turn-down of up to 1000:1 allows the ATMF mass flowmeter to measure both extremely high and low flows. SmartMeasurement ATMF Series NIST Traceable Digital Thermal Mass Flow Meter is unique in making flare/vent gas measurements. A single meter can handle the extremely wide flow ranges both in normal operations and upset conditions, while operating within the prescribed accuracy requirements.

Considering these meters are typically required to be retrofitted into existing piping galleries, installation costs can be a significant factor in choosing flow meter technologies. With SmartMeasurement ATMF mass flowmeters there is no requirement to break the existing piping or to even take the lines out of service. Using an insertion measuring probe installed through a small isolation valve assembly makes this possible. SmartMeasurement ATMF mass flowmeters have a high resistance to gas contaminants and virtually no annual maintenance, making them reliable and very easy to own and operate. In addition, the Flow Meter has negligible pressure drop which is an important feature in lower gas flows.

Advantages:

• SmartMeasurement ATMF mass flow meters measure the mass flow of flares from a very high flow to a low flow with a turn-down of 100:1 or better.
• SmartMeasurement ATMF thermal mass flow meters are the only mass flowmeters in the market that can show if the flow meter is within the original calibration specification.

Natural Gas Flow Measurement

Some natural gas wellheads can have up to 3000 wells that require regular flow rate and flow total verification. SmartMeasurement ATMF mass flowmeters are used in mobile trucks one for low to medium flow and one for medium to high flow as a portable system to measure flow from wellhead to wellhead. The operator can independently move from location to location and the data can be transferred via MODBUS to the control room. Connected at the wellhead atmospheric discharge, SmartMeasurement ATMF mass flowmeters automatically perform temperature and pressure compensation and are accurate to ± 1%. Unlike volumetric flow meters, ATMF mass flowmeters don’t need pressure and temperature measurements to perform the needed mass flow measurement. Repeatability is ± 0.25% over the repeatable flow range.

Advantages:

• SmartMeasurement ATMF mass flow meters measure the mass flow of natural gas and there is no need to separately measure pressure and temperature to obtain mass flow.
• SmartMeasurement ATMF thermal mass flow meter data can be transferred via MODBUS or HART to the control room.

Vapor Measurement in Tanker Loading/Unloading

SmartMeasurement ATMF Series mass flow meters provide solutions for several difficult tanker loading/unloading applications. The ATMF mass flow meters are used to measure the flow of hydrocarbon vapors that are vented from the storage tanks, both on the tanker and at the port tank farm, to ensure compliance with environmental laws governing waste vapors. The ATMF is also used to measure nitrogen gas flow for blanketing systems.

Advantages:

SmartMeasurement ATMF mass flow meters measure vapor leakage from tankers which comply with environmental laws governing waste vapors.

Natural Gas Supply Lines

Monitoring natural gas flow to various areas of production is critical in keeping costs under control. The transportation of natural gas over great distances is a complex task, requiring specialized equipment and facilities to deliver the gas safely, efficiently, and in a ready-to-use form. Considerations include maintaining sufficient pipeline pressure, maintaining pipeline integrity, and keeping moisture levels low.

Oftentimes customers use vortex meters and flow computers and calculating mass flow was via pressure and temperature compensation fed to the flow computers. A better solution is to use one instrument such as SmartMeasurement ATMF series thermal mass flow meters. There is no need for external pressure and temperature sensors as well as a flow computer to measure mass flow. The ATMF Series features wide flow range turndown ratios up to 1000:1 and integral or remote electronic configurations with HART, or MODBUS per FM and ATEX approval standards. NIST traceable calibration certificates are supplied with every flow meter as a standard product feature.

Advantages:

• SmartMeasurement ATMF mass flow meters measure the mass flow of natural gas and there is no need to separately measure pressure and temperature to obtain mass flow.
• SmartMeasurement ATMF thermal mass flow meter data can be transferred via MODBUS or HART to the control room.

Pharmaceuticals

SmartMeasurement has many successful flow measurement applications in the Pharmaceutical industry. Our ALSONIC-DSP family of non-intrusive ultrasonic flowmeters has been used in hygienic flow systems, where the transducers never come in contact with the process flow. The SmartMeasurement ALMAGWP electromagnetic flow meter with PFA liner and Tri-Clamp® process connections is available with accuracies of up to ±0.2% and is used for critical, high-accuracy measurements. Our ATMF series thermal mass flow meters that can measure airflow in critical pill coating systems have been successfully used in this application. Our ALCM family of Coriolis mass flowmeters makes critical measurements in fuel nozzle systems. SmartMeasurement provides a one-stop shop for all flow metering requirements in difficult pharmaceutical flow measurement applications.

Hygienic Flow Measurements

Pharmaceutical water consists of, water used for cleaning such as sterile purified water, or (PW), and water for injection (WFI) including sterile water for irrigation and inhalation. The best solution to measure these waters is a non-intrusive clamp flowmeter such is highly accurate.

Installing and maintaining traditional flow meters means shutting down the process and cutting the pipe can mean microbiological growth can occur. This is where the non-intrusive nature of ALSONIC-DSP Ultrasonic flowmeters which are installed outside the pipe becomes the flow meter of choice.

The SmartMeasurement ALSONIC-DSP Ultrasonic flowmeter transducers are manufactured with a stainless steel head, have a high IP rating, and are perfectly designed for clean room installation. They can be installed on pipes of any common material including various plastics, stainless steel, and flexible tubes.

For non-permanent installation, where spot checking of flow is necessary, the SmartMeasurement ALSONIC-DSPPL portable clamp-on flowmeters are ideal for spot measurements.

Flow measurements are also needed in the production of liquid medicines which include liquids, solutions, syrups, and mixtures as well as in the manufacturing of tablets such as in wet granulation which has been chosen as the production process. Healthcare industry regulations require that all flow measurement and other process devices must be fully “CIPable”, or suitable for “Clean in Place”. This means that the flowmeter must be fully cleaned when it is flushed with a suitable cleaning product or steam. Installing the SmartMeasurement ALSONIC-DSP Ultrasonic flowmeter means the flow transducers never touch the process and operators will never have to worry about contamination of the process.

While non-intrusive measurement saves a lot of installation cost as well as maintains the hygienic application requirements, however, often time higher accuracies of 0.5% or better may mean that the SmartMeasurement ALMAGWP electromagnetic flow meters with PFA and 3A connections with accuracies of +/-0.2% of full scale may be a better option. The cost-benefit ratios which include the installation of electromagnetic flow meters are determined by the operating engineers. SmartMeasurement ALMAGWP all ceramic electromagnetic flow meters with similar accuracies may also be considered in highly corrosive and hygienic applications.

Advantages:

• The non-intrusive nature of the SmartMeasurement ALSONIC-DSP Ultrasonic flowmeter family which can measure up to 30% solids or bubbles makes it the ideal choice for Hygienic flow measurements.
• For higher accuracy of up to 0.2% accuracy then permanent installed ALMAGWP electromagnetic flow meters with PFA and 3A connections can be a better option for hygienic applications.
• For portable spot-check measurements, the SmartMeasurement ALSONIC-DSPPL portable clamp-on flowmeters are ideal.

Pill Coating

Pill coating involves consuming pills that are more pleasant and easily digestible. Pill coating also protects the chemicals in the tablet. Some medications need to be digested slowly, pill coating assists in this time-release function. Thus, various pills have different requirements regarding their coating. Pharmaceutical manufacturers require an accurate metering system to measure air for their pill coating process and a system that can be easily incorporated into their operation. Accuracy is very important in this process. The system requires a set amount of air which is sent to a sprayer for optimum control. Air is used to control the amount of liquid coating applied to the pills. The reaction time of the flowmeter was also an issue. The best solution to accurately measure air is the SmartMeasurement ATMF series thermal mass flow meters. The ATMF flow system allows the customer to accurately measure air and its MODBUS communication system can easily be incorporated into their PLC or DSC system. This process is much like the use of a spray gun, with the flowmeter measuring the amount of air to control the amount of liquid necessary to coat the pills.

Advantages:

• The SmartMeasurement ATMF series thermal mass flow meters are successfully used to measure the air in the pill coating process to accurately control the amount of liquid necessary to maintain coating integrity. With no moving parts, wide turn-downs, and virtually no pressure loss, the ATMF is an ideal choice.

Fuel Nozzle Measurement in Coatings Applications

In coating services and thermal spray powders, specific amounts of fuel are combined with flammable industrial gases in the combustion chamber of a nozzle that in turn creates a supersonic spraying velocity. High accuracy of fuel flow measurement is critical in controlling the exact blend of fuel and gases to produce the required velocity of these combustible materials. This high velocity is used to spray the coatings which penetrate the surface. The coating, when applied to the surface, exhibits extremely high density and corrosion resistance to wear thus extending the life of the product. A highly accurate small-size SmartMeasurement ALCMDT family of Coriolis mass flowmeters are perfect flowmeters for these applications.

Advantages:

• The SmartMeasurement ALCMDT family of small-sized Coriolis mass flow meters are successfully used to measure liquid spray nozzle fuels to maintain coating integrity.

Monitoring Hydrogen Bleed-Off

Hydrogen flow measurement to a hydrogenation reactor is crucial in the manufacture of pharmaceuticals. A reduction in hydrogen consumption is a critical indication of the completion of the batching process. The SmartMeasurement ATMF series thermal mass flow meters, with its 1000:1 turndown, is ideal for measuring flow during both the high-demand batching process and the low demand after the batch. A second critical factor in this process is reducing hydrogen leaks to safe limits. An integrated system of SmartMeasurement ATMF inline thermal mass flow meters is required to continuously measure the hydrogen flow. The ATMF inline flowmeters provide accurate measurements of the uptakes of hydrogen in the reaction process. The ATMF’s highly accurate totalizer serves as a much-needed safety interlock by initiating a shutdown sequence to manage hydrogen bleed-off.

Advantages:

• The SmartMeasurement ATMF series thermal mass flow meters, with its 1000:1 turndown, is ideal for measuring flow during both the high-demand batching process and the low demand after the batch.

Nitrogen Tank Blanketing/Monitoring

Low pressure “blanket” of inert gas, usually nitrogen, is injected into the vapor space of a pharmaceutical storage tank of toxic liquids. The primary reasons are to avoid the emission of toxic fumes and prevent fire or explosion. The SmartMeasurement ATMF series thermal mass flow meters installed upstream of the tank regulator monitor nitrogen flow rates.

Advantages:

• The SmartMeasurement ATMF series thermal mass flow meters are often used for nitrogen blanket applications where it is an ideal mass flow meter due to its features of having no pressure drop and no moving parts.

Pulp and Paper

SmartMeasurement’s products have been used successfully in a variety of flow measurement applications in the Pulp and Paper industries. The SmartMeasurement ALMAGWP magnetic flow meters with ceramic lining are used in highly abrasive slurries, while the standard ALMAGWP series meters are used for any conductive liquids including water and lime mud, liquid additives such as dyes, bleaches, water, and diluted powdered-in-water. The ATMF series thermal mass flow meters are used to measure flows of natural gas used for fuel in burners as well as air/fuel balancing applications. Any liquids with low conductivity that cannot be measured with magnetic flow meters as well as high viscosity fluids are excellent candidates for the SmartMeasurement ALCM Coriolis mass flow meters. SmartMeasurement provides a one-stop shop for all flow metering requirements in the pulp and Paper industries.

Natural Gas Flow Monitoring

The amount of chemical recovery that takes place in pulp and paper mills has a direct impact on its profitability. Lime is an important chemical used in the mill cooking process and the lime kiln consumes tremendous amounts of fuel that can be very costly to its recovery. Lime mud and water in the recovery process are an excellent application for the SmartMeasurement. ALMAGWP series of Magnetic flowmeters with many choices of electrodes and liners.

Our ATMF series thermal mass flow meters with their exceptional accuracy enable proper natural gas/air ratio for maximum efficiency in the cooking process. The ATMF series thermal mass flow meters have no moving parts and all welded 316L stainless steel construction. The SmartMeasurement ATMF features mass measurement of very low flow rates with wide turndown capabilities and no pressure drop in the process media.

Advantages:

• The SmartMeasurement ATMF air mass flow meters, with no moving parts and wide turn-downs, are used for combustion air systems as well as fuel gas to boilers.
• Lime mud and water in the recovery process are an excellent application for the SmartMeasurement. ALMAGWP series of Magnetic flowmeters with many choices of electrodes and liners.

Ceramic Lining for Use with Abrasive Fluids

Additives like Titanium dioxide or Calcium carbonate as well as pigment slurries, milk of lime, or chalk suspension contain more and more solid material which requires a flow meter that can withstand abrasive liquids. Magnetic flowmeters have been used successfully for flow measurement in the pulp and paper industry for many years. Its main advantage is a straight and free sensor tube which does not produce any unwanted pressure loss and is easy to clean. To ensure correct measurement, these flowmeters are provided with an insulating lining. However for highly abrasive applications, SmartMeasurement ALMAGWP series of Magnetic flowmeters with its ceramic liner and electrodes considerably increase the operating life of highly abrasive applications. An example is the sand trap downstream of the fourth cleaner stage. A flowmeter with standard PTFE lining was able to resist the demanding operating conditions for approximately two months, only. The device with special ceramic lining is still working perfectly after an operating life of already 1.5 years. The ALMAGWP series of Magnetic flowmeters with ceramic lining, are available with either HART or MODBUS communication protocol and are available from 25-150mm (1-6”).

Advantages:

• The SmartMeasurement ALMAGWP series of Magnetic flowmeters with the ceramic liner option and electrodes considerably increase the operating life of highly abrasive applications.

The Mass Flowmeter for Measuring the Concentration of Additives

In paper production, it is extremely important to measure the various additives to ensure product quality. Liquid additives such: as dyes, bleaches, powdered products diluted in water, and liquids with a low conductivity and/or high viscosity are used in various processes in a paper mill. Starch additives are used in recycled papers to increase the strength of the cardboard. The starch arrives at the mill in powder form with various particle sizes and moisture content and is stored in silos. Using a variable speed auger the starch is then mixed with water in a small tank and then pumped into the piping system for transportation to the cooking system. Maintaining the correct water-to-starch balance is critical in this process. The SmartMeasurement ALMAGWP series of Magnetic flowmeters offer an economic choice in measuring starch water.

Starch must be cooked properly to ensure that the finished product has a consistent quality and thereby accurate mass balancing is needed between the cooking additives. The concentration of the starch in water and the mass of the dry product must be as consistent as possible. Historically Magnetic flowmeters were used to obtain the measure of additives as well as water, however being a volumetric flowmeter; it cannot accurately determine the mass of each additive in the process. A more price-conscious solution in this application has been the use of the SmartMeasurement ALCM Coriolis mass flow meters for direct mass measurement. The ALCM series replaces the existing volumetric flowmeters with the more precise mass flow measurement of the concentration of a solid diluted in water. The density measurement which was obtained experimentally can be directly measured with the SmartMeasurement ALCM Coriolis mass flow meters. Concentration values are sent to a control room via MODBUS and the concentration of the liquid will be controlled (in this case starch) at different temperature levels. The use of the mass flowmeter during the cooking phase allows consistency of the concentration values of starch to be achieved, which means that the quality of the final product is more consistent and within the manufacturing tolerances required.

Advantages:

• The SmartMeasurement ALCM Coriolis mass flow meters have proven successful in measuring both mass flow and density in starch additive applications.
• The SmartMeasurement ALMAGWP series of Magnetic flowmeters offer an economic choice in measuring starch water.

Water & Wastewater

SmartMeasurement’s products have been used in a variety of flow measurement applications in the Water and Wastewater industry. SmartMeasurement’s ALMAGWP electromagnetic flow meters have been successfully used to measure wastewater sludge and raw water while the ALSONIC family of ultrasonic flow meters have been used for similar applications where customers can sacrifice the higher accuracy of electromagnetic flow meters to gain the non-intrusive nature and portability of the ALSONIC family of ultrasonic flow meters. The ALMAGIS insertion magnetic flowmeter combined with a level transmitter can be used for open-channel sludge and effluent system applications. For open-channel applications with relatively clean liquids, the ALSONIC-AVM open-channel ultrasonic flow meters are the instrument of choice. Please see our Water & Wastewater Brochure Download

The ATMF series thermal mass flow meters are used in biogases, aeration, and combustion air systems as well as fuel gas monitoring in boiler systems. In methanol and additive applications, the SmartMeasurement ALCM Coriolis mass flow meter has been used with success. SmartMeasurement provides a one-stop shop for all flow metering requirements in the water and wastewater industries.

Magnetic Flowmeters and Ultrasonic Flowmeters in Wastewater Treatment Plants

In general, both magnetic flowmeters, and ultrasonic flowmeters can be used where gas and solids content is low. If gas and solids content is high, magnetic flowmeters are the better choice because gas and solids can severely dampen the sound pulse used by transit-time meters. The SmartMeasurement ALSONIC ultrasonic flowmeter Transit-time ultrasonic meters with their ability to measure up to 30% solids and bubbles are suitable for most of the flow measurement applications in this process. Exceptions are the location downstream of the aeration process in the biological treatment, and also the RAS and WAS lines. In the former, the sludge typically contains a high content of gas; the latter contains a high solid content. The processes within sludge treatment are generally the domain of electromagnetic flow meters because of the typical high solids and gas content where a more accurate SmartMeasurement ALMAGWP magnetic flowmeters with accuracies up to 0.2% becomes the instrument of choice for sludge applications.

Advantages:

• The SmartMeasurement ALSONIC ultrasonic flowmeter Transit-time ultrasonic meters with their ability to measure up to 30% solids and bubbles are suitable for most of the flow measurement applications in wastewater processes.
• Customers requiring higher accuracies will use the SmartMeasurement ALMAGWP magnetic flowmeters with accuracies up to 0.2%.

Regeneration of Water Wells

Many independent well regeneration and maintenance companies perform camera inspections and maintain existing water wells and water treatment installations for water utility companies. The maintenance of wells involves the exchange of pumps and pipes, the cleaning of filters, and the regeneration of complete wells. Maintenance companies have many maintenance skids at their disposal for the treatment of wells.

At many locations there are meadows and forests; mains power is often not available. Water maintenance companies require accurate flow measurements for well maintenance activities and for building new wells. Well, treatment oftentimes involves checking the calibrated volume of water abstracted from a well to know how much the water level is reduced. These companies must report to local governments on their findings. As a result, the amount of water that can be abstracted is often limited. In addition, governments demand that in case of good maintenance, such as cleaning under high pressure and chemical regeneration, the volume of water that is pumped and discharged during the treatment should be measured accurately.

The SmartMeasurement ALMAGBAT magnetic flowmeters is a standalone water meter with battery power that provides a good solution for remote locations where no power is available. The ALMAGBAT has a very high turndown ratio of 1 to 400 an important factor due to the measured flow can vary from very low flows to very high flows. At locations, where the piping cannot be removed or where there is no space to install a flowmeter, the SmartMeasurement ALSONIC-DSP ultrasonic flowmeter clamp-on ultrasonic flowmeter is used. The maintenance skids are used at many locations with different flow rates and also flow rates of a well under test can vary from high to low. Contrary to mechanical meters, the ALMAGBAT as well as the ALSONIC-DSP has no internal moving parts, so there is nothing to wear and nothing to block, as well as no pressure drop.

Advantages:

• The SmartMeasurement ALMAGBAT magnetic flowmeters is a standalone water meter with battery power that provides a good solution for remote locations where no power is available.
• Locations, where the piping cannot be removed or where there is no space to install a flowmeter, the SmartMeasurement ALSONIC ultrasonic flowmeter clamp-on ultrasonic flowmeter is used.

Water Abstraction Control

To manage water supplies better water abstraction controls are extremely important. Normally these abstraction controls are applied to where water is being drawn for purposes such as drinking water, industrial usage, or irrigation. Abstraction controls are important because restricting the amount of water that can be drawn from any one source helps prevent environmental damage, such as depletion or, harm to aquatic life as well as overall management and conservation of water sources. Therefore it is highly necessary to measure the amount of water abstracted and to ensure that consumption remains within the prescribed limit.

Selecting the appropriate flowmeter for abstraction controls depends on factors, including the desired accuracy and repeatability and the characteristics of the installation. For example, where water is being abstracted from a river or stream, pebbles and sediment may be present which could quickly damage and even destroy a mechanical meter. Where sea water is being abstracted, the salinity of the water can also quickly wear out a stainless steel flowmeter, requiring consideration of the materials of construction. This is where the SmartMeasurement ALMAGWP family of magnetic flowmeters becomes the flow meter of choice. Compared to other flowmeters the ALMAGWP magnetic flowmeters with various linings give protection against high sediment flows, and a variety of materials, including ceramic linings for particularly abrasive flows. With no moving parts, they do not suffer from problems with wear and tear, minimizing maintenance, and require no upstream strainers to filter sediment. If a portable solution is required, the portable SmartMeasurement ALSONIC-DSPPL ultrasonic flowmeter Transit-time ultrasonic meter with its ability to measure up to 30% solids and bubbles becomes the instrument of choice.

Advantages:

• Water is being abstracted from a river or stream, pebbles, and sediment may be present which could quickly damage and even destroy a mechanical meter, therefore the SmartMeasurement ALMAGWP magnetic flowmeters with various linings give protection against high sediment flows, a variety of materials, including ceramic linings for particularly abrasive flows.
• When a portable solution is required, the portable SmartMeasurement ALSONIC-DSPPL ultrasonic flowmeter Transit-time ultrasonic meter with its ability to measure up to 30% solids and bubbles becomes the instrument of choice.

Water Distribution Networks

Transportation of potable water involves the use of pipes that can run through densely populated areas, cross rivers, and other obstructions which will affect the rate of flow from its source to its final destination for usage. Accuracy is an important criterion in selecting a flowmeter because it concerns the custody transfer of potable water between two independent sources. The flow measurement is subject to fiscal regulations and therefore requires a certification of accuracy. Often at the location of installation, there is no mains power available, so a battery-powered, stand-alone, water meter is preferred. The SmartMeasurement ALMAGWP family of magnetic flowmeters high accuracies of up to 0.2%, wide turndown ratio is a popular flow meter. When a self-powered flow meter is needed, the battery-powered, stand-alone, ALMAGBAT offers water utilities an opportunity to improve revenues because of high accuracies at high and low flow rates and because the water meter maintains its initial accuracy over a long period. The sensors have IP 68 mounting, allowing the meter to be temporarily or continuously submerged in water. Magnetic flowmeters water meters maintain their accuracy over time and due to their robust construction the time spent on routine maintenance and service activities can be reduced to a minimum.

Advantages:

• The SmartMeasurement ALMAGWP family of magnetic flowmeters high accuracies of up to 0.2%, wide turndown ratio is a popular flow meter.
• When a self-powered flow meter is needed, the battery-powered, stand-alone, SmartMeasurement ALMAGBAT offers the best alternative to a standard AC or DC-powered magnetic meter.

Drinking Water

Since a majority of potable water processes in conductive liquids, magnetic flowmeters are suitable for almost all flow measurement applications, whereas mechanical flow meters are often used and are usually oversized for measurement. In high-flow applications, mechanical meters can be measured with reasonable accuracy, but low flows at night can be very inaccurate. The SmartMeasurement ALMAGWP family of magnetic flowmeters is an ideal choice for older mechanical water meters that reach their lifespan and are up for replacement. A major benefit for customers is that the ALMAGBAT, contrary to mechanical meters, is obstruction-free and therefore causes no pressure loss. High and low flows are measured with high accuracy and with high repeatability. Because there are no internal parts that can wear, the ALMAGBAT maintains its accuracy over time offering reliability and reduced maintenance. The ALMAGBAT display shows the rate, and total for billing purposes plus a status indication of the battery, the flow/counter direction, and empty pipe detection.

Advantages:

• The SmartMeasurement ALMAGWP family of magnetic flowmeters high accuracies of up to 0.2%, wide turndown ratio is a popular flow meter in replacing mechanical meters because of its obstruction-free and no-pressure loss features.
• When a self-powered flow meter is needed, the battery-powered, stand-alone, SmartMeasurement ALMAGBAT offers the best alternative to a standard AC or DC-powered magnetic meter.

Pressure Filter System in Water Treatment Plants

The quality of untreated water can vary depending on its extraction point. Over one-third of the entire amount of ground filtrate in the waterworks is conducted through pressure filter tanks filled with quartz chips for the biological filtering out of manganese. This section of a treatment plant is the most important area in water treatment plants. Water analysis is made to which suspended particles and colloids are filtered out of the untreated water and by how much. The SmartMeasurement ALMAGWP family of magnetic flowmeters is used for this most important area of water treatment. The ALMAGWP stands out due to its high measuring performance while also boasting extremely rugged construction. The ALMAGWP‘s steel flow body is fully welded and leak-tested at the factory. Moreover, The ALMAGWP is thoroughly tested ovperioderiod of 20 hours at temperatures between –20°C and +60°C.

Advantages:

• In the pressure filter system, the SmartMeasurement ALMAGWP family of magnetic flowmeters is used for its ability to measure flows containing suspended particles due to its high accuracy and rugged construction.

Booster Pump Works with Collector Well in Water Treatment Facilities

Many waterworks plants have rotary pumps with electric drives that take on the task of supplying potable water to the public supply network. The SmartMeasurement ALSONIC-DSP ultrasonic flowmeter clamp-on flowmeter with its ability to measure up to 30% suspended solids is ideal for the measurement of different water qualities and flocculating agents. The ALSONIC-DSP with its four-channel configuration covers up to four applications with a single electronics unit and becomes more economical than a single measuring fixed magnetic flowmeter. The use of only one device for each flow measuring station not only creates planning and investment security but also keeps warehouse management streamlined. In addition, there is the unique diagnostics capability reduces periodic maintenance intervals and unexpected downtimes are therefore also a thing of the past.

Advantages:

• The SmartMeasurement ALSONIC-DSP with its four-channel configuration covers up to four applications with a single electronics and becomes a more economical flow meter than a single measuring fixed magnetic flowmeter in the multi-pipe network water collection treatment facilities.

Corrosion Protection and Disinfection

In waterworks, the untreated water from all of the vertical wells is consolidated in deep containers. Natron a kind of soda ash base is used in chemical treatment by liquors for increasing the PH value and monophosphate is dosed for protecting the pipeline network and home-installed pipes from corrosion. Optionally, a chlorine bleaching system can be connected for dosing, to prevent microbiological effects. Dosing requires the use of a highly accurate flowmeter, but also chemically durable such as the SmartMeasurement ALMAGWP family of magnetic flowmeters is various non-corrosive liners and flow bodies.

Advantages:

• The SmartMeasurement ALMAGWP family of magnetic flowmeters with various non-corrosive liners and flow bodies are the flow meters of choice as they are highly accurate and chemically durable dosing operations.

Clean Water From Water Treatment Facilities

Measuring the potable water intended for the population must precisely comply with government regulations. Therefore, the selection of the flowmeter and its materials inside the measuring pipe is extremely important. The SmartMeasurement ALMAGWP family of magnetic flowmeters have sensors that have liners at comply with governmental authorities. The ALMAGWP meets these criteria and is wet calibrated with a NIST-certified volumetric calibration station and is delivered with an official calibration certification.

Advantages:

• The SmartMeasurement ALMAGWP family of magnetic flowmeters is popular due to having sensors and liners that are in compliance with governmental authorities for clean drinking water coming out of water treatment facilities.

Open Channel Measurement in Partially Filled Wastewater and Sludge Purification Plants

Water purification plant has a two-stage biological purification system that eliminates nitrogen and phosphate downstream wastewater filter. These plants also have sludge digestion and sludge treatment systems on-site with drainage and drying. Wastewater flows into various collectors and then flows into the plant’s inlet. Flow can either be moved by natural pipe gradients or pushed up to the plant. The pipes are partially filled with between 200-1600mm diameters. Measurement of this flow must be done with both a flow and level instrument as written in“measurement principals” in our open channel section.

The SmartMeasurement ALMAGIS insertion magnetic flowmeter combined with a level transmitter is ideal for open-channel liquid sludge measurement. The ALMAGIS is inserted close to the bottom of the pipe where there will always be flow while any level transmitter can be used on top of the pipe to monitor the height of the flow. The average flow rate in the partially filled cross-section is determined electromagnetically via two measuring electrodes, which are always under the surface of the water and therefore cannot be obscured, even at levels of only 10% of the inside diameter. The level can be determined using any level measurement principle such as capacitive, radar, ultrasonic, etc. The signal of each instrument is sent to the SmartMeasurement ALMAGIS system control panel where instantaneous and total flow is calculated. Measurement takes place independently of deposits and dirt on the pipe walls and is unaffected by wave formation. Another benefit is the abrasion-resistant polyurethane lining, which remains resistant even to sand and stones. In addition to flow, total volume, and level, the ALMAGIS system control panel indicates various reliable reports when limit values are undershot or exceeded.

The SmartMeasurement ALMAGIS insertion magnetic flowmeter combined with a level transmitter is ideal for open-channel liquid sludge measurement. The ALMAGIS is inserted close to the bottom of the pipe where there will always be flow while any level transmitter can be used on top of the pipe to monitor the height of the flow. The average flow rate in the partially filled cross-section is determined electromagnetically via two measuring electrodes, which are always under the surface of the water and therefore cannot be obscured, even at levels of only 10% of the inside diameter. The level can be determined using any level measurement principle such as capacitive, radar, ultrasonic, etc. The signal of each instrument is sent to the SmartMeasurement ALMAGIS system control panel where instantaneous and total flow is calculated. Measurement takes place independently of deposits and dirt on the pipe walls and is unaffected by wave formation. Another benefit is the abrasion-resistant polyurethane lining, which remains resistant even to sand and stones. In addition to flow, total volume, and level, the ALMAGIS system control panel indicates various reliable reports when limit values are undershot or exceeded.

Advantages:

• The SmartMeasurement ALMAGIS insertion magnetic flowmeter combined with a level transmitter is ideal for open-channel liquid sludge measurement.

Open Channel Measurement in Partially Filled Water Distribution Channels

Large water pipes or partially filled water channels are used to distribute water throughout the utility networks. These large pipes are partially full so that when storms or water surges occur, the pipes don’t break. Whereas partially filled water channels allow enough unused volume so as not to cause spillage or flooding in its surroundings. Partially filled pipes or open channels must have both velocity and level measurements as the water level or flow area increases or decreases during the year. The SmartMeasurement ALSONIC-AVM open-channel ultrasonic flowmeter combined with a level transmitter is ideal for area velocity measurement. Systems of up to 15 meters or more have been successfully measured with the SmartMeasurement ALSONIC-AVM ultrasonic transducers installed on the opposite side of the channel. An independent level transducer is connected to the ALSONIC-AVM flow computer provides an accurate flow rate and total flow of any partially filled channel or pipes.

Advantages:

• The SmartMeasurement ALSONIC-AVM ultrasonic flowmeter combined with a level transmitter is ideal for open channel water measurement.

Untreated Wastewater

The wastewater flows through a sand filtering system with an automatic sand screener. The aired sand filter ensures that sand and other mineral solids settle on the bottom of the sand filter basin while fats in the wastewater float to the surface. The wastewater then flows into the pre-purification consisting of four rectangular settling basins in which all un-dissolved pollutants that are heavier than the water settle. Fats, oils, and light plastics that were not completely removed in the aired sand filter float to the surface of the water and are skimmed off. Several SmartMeasurement ALMAGWP families of magnetic flowmeters are installed in the untreated water inlet of the pre-purification system. The ALMAGWP is installed with either polypropylene or ebonite liners to guarantee a high degree of resistance to solids and abrasive media.

Advantages:

• Untreated wastewater with its high degree of solids and abrasive material becomes an excellent application for the SmartMeasurement ALMAGWP families of magnetic flowmeters where it is installed in the untreated water inlet of the pre-purification system.

Measurement of Iron Chloride in Light Load Aeration

In light load aeration activated sludge is separated from the wastewater. In the inlet of the secondary sedimentation, iron chloride or an equivalent substance is added for the elimination of the phosphates just as with the sand filter. In measuring iron chloride the SmartMeasurement ALMAGWP families of magnetic flowmeters with PTFE special lining are used. The dosing of flocculating agents must always be adjusted to the amount of wastewater and the degree of turbidity. With a measuring accuracy of 0.2 % of the measuring value and a reproducibility of 0.06%, ALMAG sets the standard for other magnetic flowmeters. In addition to the PTFE special lining, high-value ceramics are also available with the ALMAGWP families of magnetic flowmeters for more abrasive fluids.

Advantages:

• The SmartMeasurement ALMAGWP families of magnetic flowmeters with PTFE special lining are used due to the corrosive nature of phosphates and iron chloride.
• Special lining, high-value ceramic liners, and/or electrodes are also available with the ALMAGWP families of magnetic flowmeters for more abrasive fluids.

Flow Measurement of Sludge

The sludge treatment allows biological stabilization of the sewage sludge. Effective sludge digestions are needed to keep the resultant smells to an absolute minimum. The main sludge from the biological purification stages undergoes thickening in the so-called main sludge thickener and is temporarily stored in sludge storage containers before digestion. In both the pre-thickener and the main sludge thickener, the SmartMeasurement ALMAG families of magnetic flowmeters are used. Thanks to the unique diagnostics capabilities of the ALMAG installation and operating status of the device can be monitored.

Advantages:

• The SmartMeasurement ALMAGWP families of magnetic flowmeters are the flow meter of choice in sludge measurement.

Methanol Measurement with Coriolis Flowmeters

In the second stage of aeration (often time called light-duty aeration) reduced nitrogen compounds remain in the wastewater in the form of ammonia. Highly poisonous ammonia is converted into nitrate (nitrification) and then further converted into nitrogen. Methanol is injected during the purification process to accelerate the purification process. The mass flow of liquid methanol is critical in calculating the efficiency of ammonia purification for plant managers. The SmartMeasurement ALCM Coriolis mass flow meters in homogeneous mixtures are practically made for this application where it reliably determines mass flow rate, density, volume, temperature, mass or volume concentration, and percentage of solids accurately.

Advantages:

• The mass flow of liquid methanol is critical in calculating the efficiency of ammonia purification to plants and therefore the SmartMeasurement ALCM Coriolis mass flow meters in homogeneous mixtures are practically made for this application, where both mass flow, density, and volume measurement are required.

Aeration Process

In the first biological purification stage, a heavy-duty aeration system is used with air to supply oxygen to biological tanks to speed up the decomposition of sludge waste. Compressed air is necessary to promote optimal bacteria growth in aeration basins and the mass of dissolved oxygen is measured. One of the largest expenses incurred in operating these systems is the cost of the compressed air. Closely controlling the aeration process can reduce energy consumption by as much as 25%, and accurate measurement is critical to success in achieving this goal. Surface aerated basins use aerobic micro-organisms to remove 80 to 90% of organic matter in wastewater. Oxygen concentration in the water basins is a critical factor in promoting the optimum micro-organism growth rate needed to treat the water in the shortest amount of time. As a result, large compressors are used to force air through hundreds of air diffusion filters at the bottom of the aeration basins, providing a constant 24/7 supply of oxygen to the micro-organisms in the water. This is where the SmartMeasurement ATMF series of thermal mass flow meters become the instrument of choice. Volumetric flowmeters measure the volume of air (Oxygen) which varies with changes in ambient temperature and pressure resulting in inaccurate flow measurement. The ATMF series thermal mass flow meters are not affected by changes in process conditions thereby providing a more accurate measurement for plant operators.

Carbon compounds are removed from the wastewater in various aeration basins operating in parallel. The heavy-duty aeration system often replaces old-style trickling filters in the biological purification stage. Several SmartMeasurement ALMAG families of magnetic flowmeters are installed to measure the return sludge in the heavy-duty aeration systems. The reliable detection and measurement of thick sludge using magnetic flowmeters are important because large proportions of solid bodies and gas bubbles frequently cause a noisy measuring signal.

Advantages:

• The SmartMeasurement ATMF series of thermal mass flow meters become an instrument of choice for the aeration process because volumetric flowmeters measure the volume of air (Oxygen) which varies with changes in ambient temperature and pressure resulting in inaccurate flow measurement.
• The SmartMeasurement ALMAGWP families of magnetic flowmeters are used to measure the return sludge in heavy-duty aeration systems.

Biogas Measurement

In either Aerobic digestion which uses bacteria in the presence of oxygen or anaerobic digestion which uses bacteria in the absence of oxygen bacteria break down some of the sludge in biogas. This biogas usually contains over 50% methane and the remainder of carbon dioxide. Both carbon dioxide and methane are expensive and can be sold or in the methane case used as fuel. Therefore accurate measurement of biogas is required. One problem with the biogas process involves very low flows which volumetric flowmeters cannot monitor. Moreover, because biogas can be sold, accurate mass flow measurement is needed. This is where the SmartMeasurement ATMF series of thermal mass flow meters become an instrument of choice. Not only it can measure extremely low velocities of down to 0.02mps but it also measures mass flow directly without the need to monitor pressure and temperature to infer mass flow.

Advantages:

• The SmartMeasurement ATMF biogas mass flow meters are ideal in biogas applications due to their ability to measure extremely low velocities of down to 0.02mps. Unlike volumetric gas flow meters, they measure mass flow directly without the need to monitor pressure and temperature to infer mass flow as all volumetric gas flow meters.

Biogas for Cogeneration Plants in Wastewater Facilities

Many Wastewater Treatment Facilities generate the majority of their electric power by using internal combustion engines that burn a mixture of methane gas produced by the sewage digestion process. Producing abundant, healthy amounts of biogas each day in a digester can be the cornerstone of a renewable energy program. Biogas generated during the digester system is cleaned, compressed, and mixed with natural gas, this biogas becomes a valuable fuel for the plant’s co-generators, which produce enough electricity to meet over 50% of a plant’s electrical needs. Since digester gas applications operate at pressures just slightly above atmospheric and produce very low flow rates, instrumentation must have the ability to measure and remain accurate even at these low pressures. Volumetric gas flowmeters, which are traditionally differential pressure (DP) flowmeters, require a pressure drop to make the measurement. Low flows create a very small differential pressure across a DP device such as an orifice plate or annubar and flows cannot be monitored. This is where the SmartMeasurement ATMF series of thermal mass flow meters become the instrument of choice. The ATMF insertion probes with their ½’ diameter sensors can measure mass flow, temperature, velocity, etc. with virtually no pressure drop. Very low flow digester gas requires high accuracies of 1% and a turndown (100:1), while accurately measuring its mass without the need for pressure, temperature transmitters with a flow computer, the SmartMeasurement ATMF mass flow meters are a better choice than volumetric gas measurement.

Advantages:

1. The ATMF insertion probes with their ½’ diameter sensors can measure mass flow, temperature, velocity, etc. with virtually no pressure drop. Velocities of 0.02 with high turndowns of better than 100:1 are successfully measured.

Biogas from Landfills for Cogeneration

Solid wastes collected from various sources including households, commercial, and industrial activities enter a landfill, where methanogen bacteria decompose the organic material. A by-product of the bacterial decomposition is biogas, composed of 50% methane and 50% carbon dioxide. Millions of tons of municipal solid wastes are disposed of in sanitary landfills where globally, landfills are the third largest anthropogenic emission source, accounting for about 13% of methane emissions or over 818 million tons of carbon dioxide equivalents (MMTCO2e). Over 1,200 landfills worldwide collect landfill gas which reduces greenhouse gas emissions and accrues emissions credits to meet the pollution regulatory reporting standards.

To collect this landfill gas, a series of pipes are embedded within the landfill and a “flare” is used to burn off the collected gas. A better use of this gas is for cogeneration where it is compressed and mixed with natural gas, which in turn can be used to run a power generator. The biogas is a clean energy source in the cogeneration process. Landfill gas is very humid, at low pressure (20-40 mBarg) and about 40-60°C (100°F). Therefore measuring the biogas as it leaves the landfill is difficult for volumetric gas flowmeters. Low pressure makes differential pressure (DP) devices like orifice plates unsuitable since they require a fairly large differential pressure to operate. Also, landfill gas is often very dirty with a high moisture and particulate content. This can clog up devices like annubars and orifice plates or gum up turbine meters and similar instruments that have moving parts. The SmartMeasurement ATMF series of thermal mass flow meters, its ability to measure low flow, offers virtually no pressure drop, constructed with no moving parts become the instrument of choice.

Advantages:

• The SmartMeasurement ATMF air mass flow meters, with their no moving parts and wide turn-downs, are used for measuring biogas or landfill gas for cogeneration plants whereas volumetric gas flow meters can often clog up or gum up due to high moisture and particulate contents in biogas.